Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2014 TCM FD40-A1 diesel forklift featuring an 8,000 lb capacity at a 24" load center. Equipped with a 2-stage mast (157" lift height / 110" lowered height), side shift, and 48" forks. Rides on good solid tires and comes with fresh new paint. Ready to work! Short Bulleted Option (Easy Copy/Paste): 2014 TCM FD40-A1 Capacity: 8,000 lbs @ 24" Load Center Fuel Type: Diesel Mast: 2-Stage (157" Lift / 110" Lowered) Attachments: Sideshift Forks: 48" Standard Forks Tires: Solid Condition: Fresh New Paint
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FD40-A1
    • Manufacturer: TCM
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 14.6 feet
    • Overall Width: Approximately 5.5 feet
    • Overall Height (to top of overhead guard): Approximately 8.5 feet
    • Wheelbase: Approximately 6.5 feet
    • Ground Clearance: Approximately 9 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: Approximately 11.2 mph
    • Gradeability: 23%
  • Engine
    • Engine Model: Isuzu 6BG1
    • Engine Type: Diesel, 6-cylinder
    • Displacement: 399 cubic inches
    • Rated Output: 83.8 HP
    • Fuel Tank Capacity: 22 gallons
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25-15-14PR
    • Rear Tire Size: 7.00-12-12PR
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 6 inches
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulic System
    • Hydraulic Tank Capacity: Approximately 16 gallons
    • Hydraulic Pressure: Approximately 2,500 psi

2014 TCM FD40-A1

pneumatic tire 4 wheel sit down diesel

$24,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Dept.
Phone:

ADDRESS
Supreme Forklift & Equipment
25250 S Power Rd
Queen CreekArizona 85142
ATTRIBUTES
YEAR:
2014
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
110 / 157 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
7300
UNIT LOCATION:
Arizona [85142]
DESCRIPTION:
FINANCING AVAILABLE
POST DATE:
7/28/2026
Reviews
Useful
Not

The TCM FD40-A1 forklift has seriously impressed me during my time working at the warehouse. It's got a solid reputation for handling tough jobs, and I can definitely see why. I remember when we had a big delivery come in on a rainy day, and this forklift maneuvered like a champ, navigating the slick surfaces without breaking a sweat. The diesel engine packs enough punch to get through heavy loads, and the pneumatic tires give it that extra stability. Overall, it's been a reliable workhorse that’s made my job a bit easier, and in a busy operation like ours, that means a lot.



Review by Mark Thompson (2/11/2026)

  • General Information
    • Model Number: FD40-A1
    • Manufacturer: TCM
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 14.6 feet
    • Overall Width: Approximately 5.5 feet
    • Overall Height (to top of overhead guard): Approximately 8.5 feet
    • Wheelbase: Approximately 6.5 feet
    • Ground Clearance: Approximately 9 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Travel Speed: Approximately 11.2 mph
    • Gradeability: 23%
  • Engine
    • Engine Model: Isuzu 6BG1
    • Engine Type: Diesel, 6-cylinder
    • Displacement: 399 cubic inches
    • Rated Output: 83.8 HP
    • Fuel Tank Capacity: 22 gallons
  • Wheels and Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 8.25-15-14PR
    • Rear Tire Size: 7.00-12-12PR
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 6 inches
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulic System
    • Hydraulic Tank Capacity: Approximately 16 gallons
    • Hydraulic Pressure: Approximately 2,500 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Freight & Delivery Estimation

Ships from: Queen Creek, Arizona

Need this equipment delivered to your facility or job site? Run our instant calculator to compare competitive carrier rates based on this unit's exact specs.

Calculate Rates Instant estimate • Free
Eliftruck Freight Transport Semi
Specs pre-loaded Flatbed & RGN options Door-to-door delivery
Origin Map
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following