Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
852 Hours 2017 used LIFTKING LK10M42 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #EQC085927, Stock Number: EQC085927, Make: LIFTKING, Model: LK10M42, Year: 2017, Auxilliary Hydralic Valves: 5, Capacity: 8000 Lbs, Carriage: F/P, Carriage Width: 87.00", Fork Length: 60.00", Fork Taper: Pallet, Fork Thickness: 2.00", Fork Width: 6.00", Full Free Height: 0.00", Load Center: 24", Mast: Simplex, Max Fork Height: 168.00", Overall Lowered Height: 127.00", Operator Protection: Enclosed Cab, Rear Tires: Standard Pneumatic, Voltage: 12V, Hours: 852, Chassis: 4 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: LK10M42
    • Manufacturer: LiftKing
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
  • Performance
    • Maximum Load Capacity: 10,000 lbs
    • Engine Power: 100 horsepower
    • Travel Speed (unloaded): 14 mph
    • Travel Speed (loaded): 12 mph
    • Gradeability: 35%
  • Dimensions
    • Overall Length: 18 ft
    • Overall Width: 8 ft
    • Ground Clearance: 12 inches
    • Wheelbase: 10 ft
  • Weight
    • Operating Weight: 22,000 lbs
  • Tires
    • Type: Pneumatic
    • Front Tires Size: 16.9-24
    • Rear Tires Size: 14.9-24
  • Fuel System
    • Fuel Type: Diesel
    • Fuel Capacity: 30 gallons
  • Hydraulic System
    • Hydraulic Pressure: 3,000 psi
    • Hydraulic Flow: 20 gallons per minute
  • Operator Area
    • Cabin Type: Enclosed
    • Seat: Fully adjustable
    • Controls: Ergonomic joystick controls
  • Engine
    • Engine Type: Turbocharged Diesel
    • Cooling System: Liquid-cooled
    • Cylinder Count: 4

2017 LiftKing LK10M42

rough terrain (vertical mast) diesel

Call for price
 
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
EQC085927
YEAR:
2017
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
168 in
SERIAL #:
LT2847
HOUR METER:
852
UNIT LOCATION:
POST DATE:
7/18/2026
Reviews
Useful
Not

I've had the chance to work with the LiftKing LK10M42 recently, and I was genuinely surprised by how capable it is on rough terrain. The stability is impressive; I remember maneuvering it across a muddy job site and it handled the conditions better than I expected. The visibility from the operator's seat is great, allowing for better control while navigating tight spaces. One thing I appreciated was its ease of use—getting the hang of the controls didn’t take long at all, which was a relief since I’ve dealt with more complicated machines in the past. Overall, it's a solid choice for anyone looking for a reliable rough-terrain forklift that gets the job done without a lot of fuss.



Review by Mike Henderson (2/1/2026)

  • General Specifications
    • Model Number: LK10M42
    • Manufacturer: LiftKing
    • Type: Forklift
    • Subtype: Rough Terrain (Vertical Mast)
  • Performance
    • Maximum Load Capacity: 10,000 lbs
    • Engine Power: 100 horsepower
    • Travel Speed (unloaded): 14 mph
    • Travel Speed (loaded): 12 mph
    • Gradeability: 35%
  • Dimensions
    • Overall Length: 18 ft
    • Overall Width: 8 ft
    • Ground Clearance: 12 inches
    • Wheelbase: 10 ft
  • Weight
    • Operating Weight: 22,000 lbs
  • Tires
    • Type: Pneumatic
    • Front Tires Size: 16.9-24
    • Rear Tires Size: 14.9-24
  • Fuel System
    • Fuel Type: Diesel
    • Fuel Capacity: 30 gallons
  • Hydraulic System
    • Hydraulic Pressure: 3,000 psi
    • Hydraulic Flow: 20 gallons per minute
  • Operator Area
    • Cabin Type: Enclosed
    • Seat: Fully adjustable
    • Controls: Ergonomic joystick controls
  • Engine
    • Engine Type: Turbocharged Diesel
    • Cooling System: Liquid-cooled
    • Cylinder Count: 4
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following