Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2017 CGC60 222" Triple Mast/119" LOWERED HEIGHT, 2 Speed Transmission, 4 way hydraulics, 3 POSITION PRESSURE REGULATOR, SIDE-SHIFTER, 48" FORKS. UNIT WAS PREVIOUSLY EQUIPPED WITH A PAPER ROLL CLAMP. ONLY 1313 HOURS, TOUCHED UP, 80% OR BETTER TIRES. Tri-Lift Industries will deliver proven industry leading products and services designed to enhance our customers business. Our stakeholders, customers, employees, manufacturers and community will benefit from the collective knowledge and passion of our entire team. We will help inspire, educate and problem solve for our customers in a manner unmatched in the market
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: CGC60
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine Type: LPG
    • Horsepower: Typically around 89 HP (varies based on configuration)
  • Dimensions
    • Overall Length (with forks): Varies
    • Overall Width: Approximately 56 inches
    • Overall Height (top of overhead guard): Approximately 85 inches
  • Performance
    • Load Capacity: Typically up to 12,000 lbs
    • Load Center: 24 inches
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 22 x 9 x 16 inches
    • Rear Tire Size: 18 x 7 x 12.1 inches
  • Braking System
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical hand lever
  • Operator Compartment
    • Seat: Adjustable suspension seat
    • Steering: Power Steering
  • Electric System
    • Battery: 12V
    • Alternator: Typically 70 amps
  • Additional Features
    • Hydraulic Controls: Fingertip controlled levers
    • Safety Features: Operator Presence Sensing System

2017 Clark CGC60

$42,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Bob Bond
Phone:
Website:

ADDRESS
Tri-Lift NC Inc
2905 Manufacturers Road
GreensboroNorth Carolina 27406
ATTRIBUTES
STOCK #:
U9376
YEAR:
2017
Manufacturer:
MODEL #:
MAST TYPE:
Three Stage
MAST HEIGHT:
222 in
SERIAL #:
CGC470L-0635-9861
SIDE SHIFTER:
Yes
HOUR METER:
1313
UNIT LOCATION:
DESCRIPTION:
13,500LB CUSHION TRIE FORKLIFT SETUP TO HANLDE PAPER ROLLS
POST DATE:
7/16/2026
Reviews
Useful
Not

The Clark CGC60 is a solid choice for anyone needing reliable indoor warehousing support. In my time operating this model, I found its LP gas system surprisingly efficient, and it really handles tight spaces well thanks to its compact design. I remember maneuvering it around stacks of pallets, and it was like driving around an old friend – pretty intuitive. The comfort of the seat helped during long shifts, and it didn’t leave me sore by the end of the day. It's not just about the specs; it actually gets the job done without too much fuss. Overall, a dependable forklift that holds up under pressure.



Review by Jake Thompson (1/16/2026)

  • General Specifications
    • Model Number: CGC60
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine Type: LPG
    • Horsepower: Typically around 89 HP (varies based on configuration)
  • Dimensions
    • Overall Length (with forks): Varies
    • Overall Width: Approximately 56 inches
    • Overall Height (top of overhead guard): Approximately 85 inches
  • Performance
    • Load Capacity: Typically up to 12,000 lbs
    • Load Center: 24 inches
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 22 x 9 x 16 inches
    • Rear Tire Size: 18 x 7 x 12.1 inches
  • Braking System
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical hand lever
  • Operator Compartment
    • Seat: Adjustable suspension seat
    • Steering: Power Steering
  • Electric System
    • Battery: 12V
    • Alternator: Typically 70 amps
  • Additional Features
    • Hydraulic Controls: Fingertip controlled levers
    • Safety Features: Operator Presence Sensing System
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following