Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FG25N5
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length (Without Forks): Approximately 9.3 ft
    • Overall Width: Approximately 3.75 ft
    • Overall Height (Cab): Approximately 6.8 ft
    • Wheelbase: About 5.5 ft
    • Minimum Ground Clearance: About 5.5 inches
  • Weight
    • Service Weight: Approximately 8,050 lbs
    • Axle Load Front: Varies based on load
    • Axle Load Rear: Varies based on load
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (Unladen): Roughly 11.5 mph
    • Lifting Speed (Unladen): Approximately 108 ft/min
    • Lowering Speed (Unladen): Approximately 98 ft/min
    • Gradeability (Unladen): 21%
  • Engine Specifications
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S4S
    • Power Output: Approximately 58 HP
    • Fuel Type: LPG
    • Number of Cylinders: 4
    • Displacement: About 143.2 cubic inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Wheels: 4
    • Tire Size Front: 7.00-12-12PR
    • Tire Size Rear: 6.00-9-10PR
  • Brakes
    • Service Brake: Hydraulic System
    • Parking Brake: Mechanical Lever
  • Steering
    • Steering System: Hydraulic Power Steering
    • Turning Radius: Approximately 6.9 ft
  • Hydraulics
    • Hydraulic System Pressure: Roughly 2,400 psi
    • Hydraulic Tank Capacity: About 11 gallons
  • Other Features
    • Operator Seat: Adjustable with Suspension
    • Instrumentation: Comprehensive Instrument Panel
    • Safety Features: Overhead Guard, Seat Belt

2019 Mitsubishi FG25N5

cushion tire 4 wheel sit down (indoor warehouse) lp gas

Call for price
 
CONTACT INFO
Name:
Greg Wolffram
Phone:
Website:

ADDRESS
LiftTech
1977 Us Higway 50
BataviaOhio 45103
ATTRIBUTES
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
85 / 188 in
SERIAL #:
AF17E07436
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
14906
UNIT LOCATION:
Ohio [45103]
POST DATE:
7/14/2026
Reviews
Useful
Not

The Mitsubishi FG25N5 has been a reliable partner during my recent warehouse project. I remember tackling a particularly heavy load one afternoon, and this forklift handled it like a champ without any fuss. It's comfortable to sit in for those long hours and surprisingly agile for something that packs so much power. The pneumatic tires grip the surface well, making it easy to maneuver even in tight spaces. I've also noticed it has a pretty decent turning radius, which definitely helps when I’m weaving around other equipment. Overall, it's been a solid addition to our fleet and has made my job a lot smoother.



Review by Jake Thompson (1/14/2026)

  • General Information
    • Model Number: FG25N5
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length (Without Forks): Approximately 9.3 ft
    • Overall Width: Approximately 3.75 ft
    • Overall Height (Cab): Approximately 6.8 ft
    • Wheelbase: About 5.5 ft
    • Minimum Ground Clearance: About 5.5 inches
  • Weight
    • Service Weight: Approximately 8,050 lbs
    • Axle Load Front: Varies based on load
    • Axle Load Rear: Varies based on load
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (Unladen): Roughly 11.5 mph
    • Lifting Speed (Unladen): Approximately 108 ft/min
    • Lowering Speed (Unladen): Approximately 98 ft/min
    • Gradeability (Unladen): 21%
  • Engine Specifications
    • Engine Manufacturer: Mitsubishi
    • Engine Model: S4S
    • Power Output: Approximately 58 HP
    • Fuel Type: LPG
    • Number of Cylinders: 4
    • Displacement: About 143.2 cubic inches
  • Tires
    • Tire Type: Pneumatic
    • Number of Wheels: 4
    • Tire Size Front: 7.00-12-12PR
    • Tire Size Rear: 6.00-9-10PR
  • Brakes
    • Service Brake: Hydraulic System
    • Parking Brake: Mechanical Lever
  • Steering
    • Steering System: Hydraulic Power Steering
    • Turning Radius: Approximately 6.9 ft
  • Hydraulics
    • Hydraulic System Pressure: Roughly 2,400 psi
    • Hydraulic Tank Capacity: About 11 gallons
  • Other Features
    • Operator Seat: Adjustable with Suspension
    • Instrumentation: Comprehensive Instrument Panel
    • Safety Features: Overhead Guard, Seat Belt
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following