Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
1993 Taylor TE-925S 92,500 lbs @ 48” 2,157 hours on meter Cummins Diesel Engine Pneumatic 92,500 @ 48" load center Mono Mast 108" lift height / 240" lowered SSFP Good Running Machine 96” Forks Smooth Tires
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: TE925S
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 17.8 feet
    • Overall Width: 8.2 feet
    • Overall Height (Cab): 10.9 feet
    • Wheelbase: 10 feet
    • Ground Clearance: 1.5 feet
  • Weights
    • Operating Weight: 66,000 lbs
    • Counterweight: 20,000 lbs
  • Performance
    • Load Capacity: 25,000 lbs
    • Engine Power: 225 HP
    • Travel Speed: 17 mph
    • Turning Radius: 14.3 feet
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 12.00 x 20
    • Tire Size Rear: 12.00 x 20
  • Hydraulic System
    • Hydraulic Tank Capacity: 40 gallons
    • Total Flow: 70 gallons per minute
    • System Pressure: 3,000 psi

1993 Taylor TE925S

pneumatic tire 4 wheel sit down diesel

$119,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Mike Flaska
Phone:

ADDRESS
Forklift Exchange, Inc.
116 W Hubbard St
ChicagoIllinois 60654
ATTRIBUTES
STOCK #:
150120867162
YEAR:
1993
Manufacturer:
MODEL #:
CAPACITY:
92500
FUEL:
MAST TYPE:
MAST HEIGHT:
108 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
2157
UNIT LOCATION:
Illinois [60638]
POST DATE:
6/23/2026
Reviews
Useful
Not

The Taylor TE925S forklift really impressed me during a recent warehouse project. It was my first time using a diesel-powered sit-down model, and I found the pneumatic tires made a big difference in how smoothly it maneuvered on our uneven pavement. The controls felt intuitive, making those tight turns around racks much easier than I expected. I remember the last time we had to rely on an older model, and how sluggish it felt in comparison. This forklift just seemed to handle everything we threw at it, from heavy loads to quick lifts, without breaking a sweat. A solid choice for anyone needing reliability and power in their operations.



Review by Mike Henderson (5/7/2025)

  • General Specifications
    • Model Number: TE925S
    • Manufacturer: Taylor
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: 17.8 feet
    • Overall Width: 8.2 feet
    • Overall Height (Cab): 10.9 feet
    • Wheelbase: 10 feet
    • Ground Clearance: 1.5 feet
  • Weights
    • Operating Weight: 66,000 lbs
    • Counterweight: 20,000 lbs
  • Performance
    • Load Capacity: 25,000 lbs
    • Engine Power: 225 HP
    • Travel Speed: 17 mph
    • Turning Radius: 14.3 feet
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 12.00 x 20
    • Tire Size Rear: 12.00 x 20
  • Hydraulic System
    • Hydraulic Tank Capacity: 40 gallons
    • Total Flow: 70 gallons per minute
    • System Pressure: 3,000 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following