Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
The new D-9V Series meets Tier 4 final emissions regulations and offers significant improvement in performance while raising the bar for fuel efficiency, servicing ease, and rugged durability. Throughout these powerhouse machines you’ll find design features that improve operator productivity and comfort and innovations that assure greater reliability and a lower cost of ownership. So, if you’re looking for a forklift that can do more for less, take a good look at the D-9V. LOAD CAPACITY 15,500-17,500 lbs. TRAVEL SPEED (UNLOADED) 21.0-21.2 mph ENGINE MODEL Hyundai DN03 POWER 110 hp/2,300 rpm LENGTH TO FACE OF FORKS 144.7-156.3 in. CAB HEIGHT 102.2-105.5 in. OVERALL WIDTH 82.2-86.4 in. TURNING RADIUS 135.3-145.7 in.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: 70D
  • Manufacturer: Hyundai
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
  • Engine Type: Diesel Engine
  • Engine Power: Varies, typically around 60-80 HP
  • Transmission Type: Automatic or Manual
  • Drive Type: 4 Wheel Drive
  • Load Capacity: Varies, typically up to 15,500 lbs
  • Overall Length: Varies, generally around 150 inches
  • Overall Width: Varies, generally around 60-80 inches
  • Overall Height: Varies, could be around 90-100 inches
  • Turning Radius: Varies, typically around 100-130 inches
  • Weight: Varies, generally around 10,000-12,000 lbs
  • Fork Length: Varies
  • Wheelbase: Varies, typically around 70-80 inches
  • Tire Type: Pneumatic
  • Seat Type: Adjustable, ergonomic
  • Lift Mechanism: Hydraulic
  • Attachment Options: Various options available
  • Safety Features: Seat belt, Overhead guard, Stability management system
Warranty
3 YEARS / 4,000 HOURS

2026 Hyundai 70D

New

pneumatic tire 4 wheel sit down diesel

$125,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Ed Valdes
Phone:

ADDRESS
Forklift Consulting LLC
10450 SW 187th Terrace
MiamiFlorida 33157
ATTRIBUTES
STOCK #:
IS 70D
YEAR:
2026
Manufacturer:
MODEL #:
CAPACITY:
15500
FUEL:
MAST TYPE:
MAST HEIGHT:
131 / 177 in
SIDE SHIFTER:
Yes
CONDITION:
New
HOUR METER:
1
UNIT LOCATION:
Florida [33157]
DESCRIPTION:
Diesel Sit-Down Forklift 70D-9V 15,500 LB. CAPACITY
POST DATE:
6/2/2026
  • Model Number: 70D
  • Manufacturer: Hyundai
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type Used: Diesel
  • Engine Type: Diesel Engine
  • Engine Power: Varies, typically around 60-80 HP
  • Transmission Type: Automatic or Manual
  • Drive Type: 4 Wheel Drive
  • Load Capacity: Varies, typically up to 15,500 lbs
  • Overall Length: Varies, generally around 150 inches
  • Overall Width: Varies, generally around 60-80 inches
  • Overall Height: Varies, could be around 90-100 inches
  • Turning Radius: Varies, typically around 100-130 inches
  • Weight: Varies, generally around 10,000-12,000 lbs
  • Fork Length: Varies
  • Wheelbase: Varies, typically around 70-80 inches
  • Tire Type: Pneumatic
  • Seat Type: Adjustable, ergonomic
  • Lift Mechanism: Hydraulic
  • Attachment Options: Various options available
  • Safety Features: Seat belt, Overhead guard, Stability management system
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following