Overview
Spec Sheet
Shipping/Freight
Equipment Description
0 Hours 2020 used HELI CPD35-G2 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #AL-40, Stock Number: AL-40, Make: HELI, Model: CPD35-G2, Year: 2020, Auxilliary Hydralic Valves: 0, Capacity: 7700 Lbs, Full Free Height: 0.00", Hours: 0
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: CPD35-G2
  • Manufacturer: Heli
  • Type: Forklift
  • Fuel Type Used: Electric
  • Capacity and Dimensions
    • Load Capacity: Approximately 7,700 lbs
    • Wheelbase: Approximately 6 ft
    • Overall Length: Approximately 11.8 ft (varies with fork length)
    • Overall Width: Approximately 4.1 ft
    • Overall Height (without mast): Approximately 6.9 ft
    • Ground Clearance (under mast): Approximately 5.3 inches
    • Ground Clearance (center of wheelbase): Approximately 9 inches
    • Tread (Front): Approximately 3.4 ft
    • Tread (Rear): Approximately 3.5 ft
  • Performance
    • Travel Speed (loaded/unloaded): Approximately 11 mph / 12 mph
    • Lifting Speed (loaded/unloaded): Approximately 1.3 ft/s / 1.6 ft/s
    • Lowering Speed (loaded/unloaded): Approximately 1.5 ft/s / 1.4 ft/s
    • Gradeability (loaded): Approximately 15%
    • Turning Radius: Approximately 7.8 ft
  • Powertrain
    • Drive Motor: AC Electric Motor
    • Voltage of Motor: 80V
  • Wheels
    • Tire Type: Pneumatic
    • Number of Wheels (Front/Rear): 2/2
    • Tire Size (Front): 28x9-15
    • Tire Size (Rear): 18x7-8
  • Miscellaneous
    • Brakes: Hydraulic
    • Steering System: Hydraulic Power Steering

2020 Heli CPD35-G2

electric 4 wheel sit down

Call for price
 
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
AL-40
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
7700
FUEL:
MAST TYPE:
SERIAL #:
05035DC0598
UNIT LOCATION:
POST DATE:
5/26/2026
Reviews
Useful
Not

The Heli CPD35-G2 electric forklift has been a real game-changer for our warehouse operations. I've gotten comfortable maneuvering it around tight spaces, and its smooth handling makes long shifts a breeze. The electric power is surprisingly quiet, which is a blessing during those early morning loading sessions when everyone is still waking up. I remember trying to move heavy loads with our old gas forklift, and honestly, I’d rather tackle a mountain of boxes than go back to that. This unit just feels so much more efficient and eco-friendly. Plus, the battery life has been impressive; I’ve yet to run into any issues during a full day of work. Overall, it’s been a fantastic addition to our team!



Review by Jake Thompson (2/10/2025)

  • Model Number: CPD35-G2
  • Manufacturer: Heli
  • Type: Forklift
  • Fuel Type Used: Electric
  • Capacity and Dimensions
    • Load Capacity: Approximately 7,700 lbs
    • Wheelbase: Approximately 6 ft
    • Overall Length: Approximately 11.8 ft (varies with fork length)
    • Overall Width: Approximately 4.1 ft
    • Overall Height (without mast): Approximately 6.9 ft
    • Ground Clearance (under mast): Approximately 5.3 inches
    • Ground Clearance (center of wheelbase): Approximately 9 inches
    • Tread (Front): Approximately 3.4 ft
    • Tread (Rear): Approximately 3.5 ft
  • Performance
    • Travel Speed (loaded/unloaded): Approximately 11 mph / 12 mph
    • Lifting Speed (loaded/unloaded): Approximately 1.3 ft/s / 1.6 ft/s
    • Lowering Speed (loaded/unloaded): Approximately 1.5 ft/s / 1.4 ft/s
    • Gradeability (loaded): Approximately 15%
    • Turning Radius: Approximately 7.8 ft
  • Powertrain
    • Drive Motor: AC Electric Motor
    • Voltage of Motor: 80V
  • Wheels
    • Tire Type: Pneumatic
    • Number of Wheels (Front/Rear): 2/2
    • Tire Size (Front): 28x9-15
    • Tire Size (Rear): 18x7-8
  • Miscellaneous
    • Brakes: Hydraulic
    • Steering System: Hydraulic Power Steering
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following