Overview
Spec Sheet
Shipping/Freight
Equipment Description
Youtube:
Video: https://youtu.be/w68pHYOUlIE
MAKE: YALE, MODEL: GDC155, YEAR: 2010, SN: D879V01662H, DIESEL ENINGE, OPEN CAB, SOLID TIRES, 15,000LB LIFT CAPACITY, 60" FORKS, 108" LOWERED HEIGHT, 133" RAISED HEIGHT, 2 STAGE MAST, SIDE SHIFT, SHIPPING DIMENSIONS: LENGTH 182" WIDTH 58" HEIGHT 108" WEIGHT 21,520 LBS
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: GDC155
  • Manufacturer: Yale
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type: LP Gas
  • Engine Specifications
    • Fuel: LP Gas
    • Cylinder Displacement: Approximately 148 cubic inches
    • Number of Cylinders: 4
  • Dimensions
    • Overall Length: Approximately 111 inches (varies with fork length)
    • Overall Width: About 48 inches
    • Overall Height (Cab): Approximately 85 inches
    • Wheelbase: Around 63 inches
    • Ground Clearance: Roughly 4 inches
  • Capacity
    • Load Capacity: Approximately 3,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (Loaded): Approximately 11 mph
    • Travel Speed (Unloaded): Approximately 12 mph
    • Lift Speed (Unloaded): Varies
    • Lift Speed (Loaded): Varies
  • Braking System
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulic System
    • Hydraulic Pump Type: Gear Pump
    • Operating Pressure: Around 2,500 psi
  • Tires
    • Tire Type: Cushion
    • Tire Size Front: 18 x 7-8
    • Tire Size Rear: 16 x 5-9
  • Steering System
    • Steering Type: Power Steering
    • Steering Angle: Approximately 90 degrees

2010 Yale GDC155

pneumatic tire 4 wheel sit down diesel

$19,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Ed Joyce
Phone:
Website:

ADDRESS
Equip Seller
10 Industrial Hwy
LesterPennsylvania 19029
ATTRIBUTES
YEAR:
2010
Manufacturer:
MODEL #:
CAPACITY:
15000
FUEL:
MAST TYPE:
SERIAL #:
D879V01662H
SIDE SHIFTER:
No
CONDITION:
Used
HOUR METER:
5051
UNIT LOCATION:
Pennsylvania [19029]
DESCRIPTION:
2010 YALE GDC155 15,000LB FORKLIFT
POST DATE:
5/5/2026
Reviews
Useful
Not

The Yale GDC155 forklift has been a game-changer for our indoor warehouse operations. It’s surprisingly nimble for a cushion tire model, making tight turns in narrow aisles feel effortless. I remember one particularly busy afternoon when we had a rush of orders; this forklift managed to keep up without breaking a sweat. The LP gas fuel type is a nice touch, providing consistent power and decent run time without the hassle of electric charging. It feels solid and reliable, which gives me confidence even when handling heavier loads. Overall, it’s a solid machine that gets the job done without any fuss.



Review by Jake Thompson (12/5/2024)

  • Model Number: GDC155
  • Manufacturer: Yale
  • Type: Forklift
  • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
  • Fuel Type: LP Gas
  • Engine Specifications
    • Fuel: LP Gas
    • Cylinder Displacement: Approximately 148 cubic inches
    • Number of Cylinders: 4
  • Dimensions
    • Overall Length: Approximately 111 inches (varies with fork length)
    • Overall Width: About 48 inches
    • Overall Height (Cab): Approximately 85 inches
    • Wheelbase: Around 63 inches
    • Ground Clearance: Roughly 4 inches
  • Capacity
    • Load Capacity: Approximately 3,500 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (Loaded): Approximately 11 mph
    • Travel Speed (Unloaded): Approximately 12 mph
    • Lift Speed (Unloaded): Varies
    • Lift Speed (Loaded): Varies
  • Braking System
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulic System
    • Hydraulic Pump Type: Gear Pump
    • Operating Pressure: Around 2,500 psi
  • Tires
    • Tire Type: Cushion
    • Tire Size Front: 18 x 7-8
    • Tire Size Rear: 16 x 5-9
  • Steering System
    • Steering Type: Power Steering
    • Steering Angle: Approximately 90 degrees
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following