Overview
Spec Sheet
Shipping/Freight
Equipment Description
2012 Hyster H155FT (15,500# capacity at 24” load center) Diesel - Cummins Tier 3; 2 stage mast 173” lift height / 115” lowered; Sideshifting Fork Positioner; 96 inch forks; New Paint; Good solids tires and 3,025 hours.
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model: H155FT
  • Manufacturer: Hyster
  • Type: Forklift
  • Capacity:
    • Maximum Load Capacity: 15,500 lbs
  • Engine:
    • Engine Type: Diesel
    • Engine Make: Cummins
    • Engine Model: QSB3.3
    • Rated Power: Approximately 110 HP
  • Dimensions:
    • Overall Length to Fork Face: Approximately 137 inches
    • Overall Width: Approximately 78 inches
    • Height to Top of Overhead Guard: Approximately 108 inches
    • Wheelbase: Approximately 93 inches
  • Weight:
    • Total Approximate Operating Weight: 23,800 lbs
  • Performance:
    • Travel Speed: Approximately 15 mph (unloaded)
    • Lift Speed: Approximately 95 ft/min (unloaded)
    • Gradeability: Approximately 32% (loaded)
  • Tires:
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25 x 15, 14PR
    • Tire Size Rear: 8.25 x 15, 14PR
  • Fuel System:
    • Fuel Capacity: Approximately 25 gallons
  • Hydraulics:
    • Pressure: Approximately 3,450 psi
  • Operator Comfort:
    • Adjustable Seat
    • AC / Heating System
    • Ergonomic Controls

2012 Hyster H155FT

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Terry Taylor
Phone:
Website:

ADDRESS
PRG Equipment
16026 Hollister St
HoustonTexas 77066
ATTRIBUTES
YEAR:
2012
Manufacturer:
MODEL #:
CAPACITY:
15500
FUEL:
MAST TYPE:
MAST HEIGHT:
115 / 173 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
3025
UNIT LOCATION:
Texas [77066]
DESCRIPTION:
2012 Hyster H155FT (15.5k cap); Cummins dsl; SSFP and 3k hrs
POST DATE:
4/29/2026
Reviews
Useful
Not

The Hyster H155FT forklift is a solid performer when it comes to moving heavy loads around the warehouse. Having operated one during a busy shipping season, I was impressed by its lifting capacity and maneuverability in tight spaces. It felt really reliable, unlike some of the older models I’ve used that would glitch or stall. The controls were pretty intuitive, which made it easier to train newer operators on the team. If you’re looking for something that gets the job done without a lot of fuss, this model has been a good fit for us. Overall, it’s proven to be a workhorse that can handle the daily grind of heavy lifting.


Review by Jake Thompson

  • Model: H155FT
  • Manufacturer: Hyster
  • Type: Forklift
  • Capacity:
    • Maximum Load Capacity: 15,500 lbs
  • Engine:
    • Engine Type: Diesel
    • Engine Make: Cummins
    • Engine Model: QSB3.3
    • Rated Power: Approximately 110 HP
  • Dimensions:
    • Overall Length to Fork Face: Approximately 137 inches
    • Overall Width: Approximately 78 inches
    • Height to Top of Overhead Guard: Approximately 108 inches
    • Wheelbase: Approximately 93 inches
  • Weight:
    • Total Approximate Operating Weight: 23,800 lbs
  • Performance:
    • Travel Speed: Approximately 15 mph (unloaded)
    • Lift Speed: Approximately 95 ft/min (unloaded)
    • Gradeability: Approximately 32% (loaded)
  • Tires:
    • Tire Type: Pneumatic
    • Tire Size Front: 8.25 x 15, 14PR
    • Tire Size Rear: 8.25 x 15, 14PR
  • Fuel System:
    • Fuel Capacity: Approximately 25 gallons
  • Hydraulics:
    • Pressure: Approximately 3,450 psi
  • Operator Comfort:
    • Adjustable Seat
    • AC / Heating System
    • Ergonomic Controls
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following