Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General
    • Model Number: 8FGC35UBCS
    • Manufacturer: Toyota
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Operators: Sit-down
  • Engine
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG (Liquid Propane Gas)
  • Dimensions
    • Overall Length: approximately 106.5 inches
    • Overall Width: approximately 47 inches
    • Overall Height (Overhead Guard): approximately 88 inches
    • Wheelbase: approximately 62.5 inches
    • Weight: approximately 12,170 lbs
  • Capacity
    • Load Capacity: 7,000 lbs
  • Tires
    • Tire Type: Cushion Tires
  • Performance
    • Travel Speed: approximately 10.6 mph
    • Load Center: 24 inches
    • Turning Radius: approximately 87 inches
  • Forks
    • Fork Length: varies

2020 Toyota 8FGC35UBCS

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$7,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jim Barnes

ADDRESS
Barnes Industrial Equipment Inc.
PO Box 5694
ElginIllinois 60121-5694
ATTRIBUTES
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
92 / 199 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
6000
UNIT LOCATION:
Florida [60121-5694]
DESCRIPTION:
Box Car-Full Maintenance-Forks-$7950
POST DATE:
4/27/2026
Reviews
Useful
Not

The Toyota 8FGC35UBCS forklift has truly impressed me during my time working at the warehouse. It handles like a dream, gliding smoothly across the floor while easily maneuvering around tight corners. One day, while moving pallets stacked high, I was amazed at how stable it felt, even when loaded. The pneumatic tires provide a nice cushion, which is a big plus during those long shifts. It's not just about the specs; using this forklift feels like being in control of a well-oiled machine that just gets things done without a fuss. Overall, it's been a reliable partner that makes heavy lifting a lot less daunting.


Review by Jason Thompson (11/27/2024)

  • General
    • Model Number: 8FGC35UBCS
    • Manufacturer: Toyota
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Operators: Sit-down
  • Engine
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG (Liquid Propane Gas)
  • Dimensions
    • Overall Length: approximately 106.5 inches
    • Overall Width: approximately 47 inches
    • Overall Height (Overhead Guard): approximately 88 inches
    • Wheelbase: approximately 62.5 inches
    • Weight: approximately 12,170 lbs
  • Capacity
    • Load Capacity: 7,000 lbs
  • Tires
    • Tire Type: Cushion Tires
  • Performance
    • Travel Speed: approximately 10.6 mph
    • Load Center: 24 inches
    • Turning Radius: approximately 87 inches
  • Forks
    • Fork Length: varies
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following