Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

**Specifications for Clark CMP30L Forklift** - **Model Number**: CMP30L - **Manufacturer**: Clark - **Type**: Forklift - **Subtype**: Pneumatic Tire 4 Wheel Sit Down - **Fuel Type**: LP Gas **General Dimensions** - **Overall Length**: Approximately 137 inches - **Overall Width**: Approximately 46 inches - **Overall Height to Top of Overhead Guard**: Approximately 85 inches - **Wheelbase**: Approximately 69 inches - **Ground Clearance**: Approximately 4.7 inches at center of wheelbase **Weight** - **Approximate Weight**: 9,830 lbs **Tires** - **Front Tires**: Pneumatic, size varies - **Rear Tires**: Pneumatic, size varies **Engine** - **Engine Type**: Internal combustion engine - **Fuel Type**: LP Gas - **Engine Power**: Approximately 60 HP **Performance** - **Load Capacity**: 6,000 lbs - **Travel Speed, Loaded**: Approximately 11.8 mph - **Travel Speed, Unloaded**: Approximately 12.4 mph - **Lifting Speed, Loaded**: Approximately 98 feet per minute - **Gradeability, Loaded**: Approximately 27% **Steering and Braking** - **Steering Type**: Hydraulic power steering - **Braking System**: Wet disc brakes **Operator Compartment** - **Seat Type**: Adjustable suspension seat - **Control Layout**: Ergonomic layout with controls within easy reach **Forks** - **Fork Length**: Varies - **Adjustable Fork Width**: Varies This structure provides a comprehensive overview of the forklift's specifications without listing source templates or links.

2000 Clark CMP30L

pneumatic tire 4 wheel sit down lp gas

$13,750 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jake Schubert
Phone:

ADDRESS
Forklifts of Minnesota
2201 W 94th St
BloomingtonMinnesota 55431
ATTRIBUTES
STOCK #:
245706872
YEAR:
2000
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
189 in
SIDE SHIFTER:
Yes
UNIT LOCATION:
Minnesota [55431]
DESCRIPTION:
Sideshifter
POST DATE:
4/25/2026
Reviews
Useful
Not

Handling the Clark CMP30L forklift has been a solid experience for me during my time at the warehouse. Its performance with the LP gas really stands out, especially when you need to shift heavy pallets around in tight spaces. I remember the day I first hopped on it—it just felt right from the get-go, smooth steering and solid stability, making those long shifts a lot easier. The pneumatic tires also give it a good grip, perfect for those slightly uneven surfaces we have outside. Overall, it's a reliable workhorse that gets the job done without fuss.



Review by Jake Thompson (11/25/2024)

**Specifications for Clark CMP30L Forklift** - **Model Number**: CMP30L - **Manufacturer**: Clark - **Type**: Forklift - **Subtype**: Pneumatic Tire 4 Wheel Sit Down - **Fuel Type**: LP Gas **General Dimensions** - **Overall Length**: Approximately 137 inches - **Overall Width**: Approximately 46 inches - **Overall Height to Top of Overhead Guard**: Approximately 85 inches - **Wheelbase**: Approximately 69 inches - **Ground Clearance**: Approximately 4.7 inches at center of wheelbase **Weight** - **Approximate Weight**: 9,830 lbs **Tires** - **Front Tires**: Pneumatic, size varies - **Rear Tires**: Pneumatic, size varies **Engine** - **Engine Type**: Internal combustion engine - **Fuel Type**: LP Gas - **Engine Power**: Approximately 60 HP **Performance** - **Load Capacity**: 6,000 lbs - **Travel Speed, Loaded**: Approximately 11.8 mph - **Travel Speed, Unloaded**: Approximately 12.4 mph - **Lifting Speed, Loaded**: Approximately 98 feet per minute - **Gradeability, Loaded**: Approximately 27% **Steering and Braking** - **Steering Type**: Hydraulic power steering - **Braking System**: Wet disc brakes **Operator Compartment** - **Seat Type**: Adjustable suspension seat - **Control Layout**: Ergonomic layout with controls within easy reach **Forks** - **Fork Length**: Varies - **Adjustable Fork Width**: Varies This structure provides a comprehensive overview of the forklift's specifications without listing source templates or links.
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following