Overview
Spec Sheet
Shipping/Freight
Equipment Description
Delivery and financing available - Call or email now for more information!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Hyster
  • Model Number: H40FTS
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • General Specifications:
    • Operator Type: Seated Rider
    • Fuel Type: LPG
    • Transmission: Powershift
    • Number of Wheels: 4
    • Tire Type: Pneumatic
  • Dimensions:
    • Overall Length: Approximately 125 inches
    • Overall Width: 45 inches
    • Overall Height (Overhead Guard): 86 inches
    • Wheelbase: 65 inches
    • Ground Clearance: 4.5 inches
    • Turning Radius: 84 inches
  • Performance:
    • Load Capacity: 4,000 lbs
    • Travel Speed (Loaded): 11 mph
    • Travel Speed (Unloaded): 12 mph
    • Lifting Speed (Loaded): 102 feet/min
    • Lifting Speed (Unloaded): 113 feet/min
    • Lowering Speed (Loaded): 114 feet/min
    • Lowering Speed (Unloaded): 102 feet/min
  • Powertrain:
    • Engine Model: Mazda 2.2L
    • Engine Power: 49 HP
    • Number of Cylinders: 4
    • Transmission Type: 1-Speed
  • Weights:
    • Service Weight: 8,040 lbs
  • Hydraulics:
    • Hydraulic System Pressure: 2,100 psi

2020 Hyster H40FTS

pneumatic tire 4 wheel sit down lp gas

$12,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Department
Phone:

ADDRESS
Forklift Pro, Inc.
9801 Industrial Drive
PinevilleNorth Carolina 28134
ATTRIBUTES
STOCK #:
27528
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
4000
FUEL:
MAST TYPE:
MAST HEIGHT:
187 in
CONDITION:
Used
HOUR METER:
3128
UNIT LOCATION:
POST DATE:
4/23/2026
Reviews
Useful
Not

The Hyster H40FTS is a solid little workhorse that really stands out in my experience with forklifts. Its pneumatic tires provide great traction, which made maneuvering around a busy warehouse feel surprisingly smooth. I remember the first time I hopped on one of these bad boys during a loading dock rush, and I was impressed by how easy it was to navigate through tight spaces. You don’t need to push the levers too hard; the controls are surprisingly responsive, which is crucial when you're trying to manage a tight schedule. Overall, it gets the job done without any fuss, making it a reliable choice for anyone in materials handling.


Review by James Henderson

  • Manufacturer: Hyster
  • Model Number: H40FTS
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • General Specifications:
    • Operator Type: Seated Rider
    • Fuel Type: LPG
    • Transmission: Powershift
    • Number of Wheels: 4
    • Tire Type: Pneumatic
  • Dimensions:
    • Overall Length: Approximately 125 inches
    • Overall Width: 45 inches
    • Overall Height (Overhead Guard): 86 inches
    • Wheelbase: 65 inches
    • Ground Clearance: 4.5 inches
    • Turning Radius: 84 inches
  • Performance:
    • Load Capacity: 4,000 lbs
    • Travel Speed (Loaded): 11 mph
    • Travel Speed (Unloaded): 12 mph
    • Lifting Speed (Loaded): 102 feet/min
    • Lifting Speed (Unloaded): 113 feet/min
    • Lowering Speed (Loaded): 114 feet/min
    • Lowering Speed (Unloaded): 102 feet/min
  • Powertrain:
    • Engine Model: Mazda 2.2L
    • Engine Power: 49 HP
    • Number of Cylinders: 4
    • Transmission Type: 1-Speed
  • Weights:
    • Service Weight: 8,040 lbs
  • Hydraulics:
    • Hydraulic System Pressure: 2,100 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following