Overview
Spec Sheet
Shipping/Freight
Equipment Description
6000LB BASE CAPACITY 3 STAGE MAST 88" LOWERED 189" RAISED KUBOTA ENGINE DIESEL FUEL ENGINE WARRANTY LED LIGHT PACKAGE STROBE LIGHT USB PORT DUAL DRIVE PNEUMATIC TIRES SIDE SHIFTER 48" FORKS
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FD30F
    • Manufacturer: Viper Lift Trucks
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions and Weight
    • Overall Length: Approximately 154 inches
    • Overall Width: Approximately 45 inches
    • Overall Height (to top of overhead guard): Approximately 87 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: Approximately 7 inches
    • Service Weight: Around 9,000 lbs
  • Performance
    • Power Type: Diesel Engine
    • Rated Load Capacity: Around 6,000 lbs
    • Travel Speed (loaded): Approximately 11 mph
    • Travel Speed (unloaded): Approximately 12 mph
    • Turning Radius: Approximately 98 inches
  • Engine Details
    • Engine Type: Diesel
    • Engine Power: Approximately 60 HP
    • Number of Cylinders: 4
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: Approximately 28x9-15
    • Rear Tire Size: Approximately 6.50-10
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,800 PSI
    • Hydraulic Tank Capacity: Approximately 12 gallons
  • Fork Details
    • Fork Length: Varies
    • Fork Width: Approximately 6 inches
    • Fork Thickness: Approximately 1.8 inches

2026 Viper Lift Trucks FD30F

New

pneumatic tire 4 wheel sit down diesel

$38,850 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Marco Flores
Phone:

ADDRESS
Illinois Lift Equipment
640 Industrial Dr
CaryIllinois 60013
ATTRIBUTES
YEAR:
2026
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
88 / 189 in
SIDE SHIFTER:
Yes
CONDITION:
New
UNIT LOCATION:
Illinois [60013]
DESCRIPTION:
6000LB CAPACITY, 3 STAGE MAST, DIESEL FUEL
POST DATE:
5/29/2026
Reviews
Useful
Not

The Viper Lift Trucks FD30F is a solid performer in the world of forklifts. I've used it quite a bit while working at a warehouse that handled heavyweight equipment, and it really holds its own. The pneumatic tires give it a good grip even on rugged surfaces, which was a game changer when we had to haul pallets over less-than-ideal flooring. It's a diesel, so you can bet on the power and efficiency during those long shifts. There’s something satisfying about knowing the truck can tackle anything you throw at it, especially when you’re on a tight deadline. Overall, it’s dependable and gets the job done without any fuss.



Review by Jake Thompson (7/6/2025)

  • General Information
    • Model Number: FD30F
    • Manufacturer: Viper Lift Trucks
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions and Weight
    • Overall Length: Approximately 154 inches
    • Overall Width: Approximately 45 inches
    • Overall Height (to top of overhead guard): Approximately 87 inches
    • Wheelbase: Approximately 70 inches
    • Ground Clearance: Approximately 7 inches
    • Service Weight: Around 9,000 lbs
  • Performance
    • Power Type: Diesel Engine
    • Rated Load Capacity: Around 6,000 lbs
    • Travel Speed (loaded): Approximately 11 mph
    • Travel Speed (unloaded): Approximately 12 mph
    • Turning Radius: Approximately 98 inches
  • Engine Details
    • Engine Type: Diesel
    • Engine Power: Approximately 60 HP
    • Number of Cylinders: 4
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: Approximately 28x9-15
    • Rear Tire Size: Approximately 6.50-10
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,800 PSI
    • Hydraulic Tank Capacity: Approximately 12 gallons
  • Fork Details
    • Fork Length: Varies
    • Fork Width: Approximately 6 inches
    • Fork Thickness: Approximately 1.8 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following