Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Manufacturer: Nissan
  • Model Number: KPH02A25V
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Performance:
    • Engine Power: Approximately 50 HP
    • Fuel Capacity: Varies
    • Travel Speed: Approximately 11 mph (loaded)
    • Gradeability: around 23% (loaded)
  • Dimensions:
    • Overall Length: Roughly 8 feet (excluding forks)
    • Overall Width: Approximately 4 feet
    • Overall Height (Overhead Guard): Around 7 feet
  • Weight:
    • Service Weight: Approximately 9,000 lbs
  • Capacity:
    • Load Capacity: 5,000 lbs
  • Tires:
    • Tire Type: Pneumatic
    • Front Tires: 2
    • Rear Tires: 2
  • Operator Convenience:
    • Seating: Sit Down
    • Steering: Power Steering

1994 Nissan KPH02A25V

pneumatic tire 4 wheel sit down lp gas

Call for price
 
CONTACT INFO
Name:
Lee Cassam
Phone:

ADDRESS
Lee Cassam & Associates
2108 Delante St
Haltom CityTexas 76117
ATTRIBUTES
YEAR:
1994
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
83 / 187 in
SERIAL #:
KPH02-900669
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
3534
UNIT LOCATION:
Texas [76117]
DESCRIPTION:
5000# Truck Mast THREE STAGE SIDE SHIFT 42" FORKS
POST DATE:
4/7/2026
Reviews
Useful
Not

The Nissan KPH02A25V forklift has been a reliable workhorse for our warehouse operations. It handles heavy loads with ease, and I appreciate the stability that the pneumatic tires provide, especially on our uneven concrete surfaces. A few weeks ago, while moving some bulky equipment, I felt confident navigating tight spaces without worrying about tipping over. The LP gas fuel keeps it running smoothly, and I’ve noticed fewer emissions compared to our older models. It's just been a solid addition to our fleet overall.



Review by Jake Thompson (12/23/2024)

  • Manufacturer: Nissan
  • Model Number: KPH02A25V
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Performance:
    • Engine Power: Approximately 50 HP
    • Fuel Capacity: Varies
    • Travel Speed: Approximately 11 mph (loaded)
    • Gradeability: around 23% (loaded)
  • Dimensions:
    • Overall Length: Roughly 8 feet (excluding forks)
    • Overall Width: Approximately 4 feet
    • Overall Height (Overhead Guard): Around 7 feet
  • Weight:
    • Service Weight: Approximately 9,000 lbs
  • Capacity:
    • Load Capacity: 5,000 lbs
  • Tires:
    • Tire Type: Pneumatic
    • Front Tires: 2
    • Rear Tires: 2
  • Operator Convenience:
    • Seating: Sit Down
    • Steering: Power Steering
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following