Overview
Spec Sheet
Shipping/Freight
Equipment Description
Solid Tires, 48" Forks
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: FG30N
    • Manufacturer: Mitsubishi
    • Type: Forklift
  • Dimensions
    • Overall Length (without forks): Approximately 8.5 feet
    • Overall Width: Approximately 4.1 feet
    • Overall Height (to top of overhead guard): Approximately 7 feet
    • Turning Radius: Approximately 8.2 feet
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: Included with FG30N
    • Fuel Type: Gasoline or LPG
    • Power Output: Variable, typically around 60 HP
  • Capacity
    • Load Capacity: 6,000 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (loaded): Approximately 11 mph
    • Lifting Speed (loaded): Approximately 110 feet per minute
  • Tires
    • Tire Type: Pneumatic or Solid (varies by configuration)
    • Front Tires: 28 inches (diameter)
    • Rear Tires: 18 inches (diameter)
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulics
    • Hydraulic System Pressure: Approximately 2,850 psi

2018 Mitsubishi FG30N

Buy or Rent

pneumatic tire 4 wheel sit down lp gas

$27,900 USD

$200 USD per day

$600 USD per week

$1,800 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Antonio Borboa
Phone:
Website:

ADDRESS
TB Forklifts
5410 Mary Francis Dr
HoustonTexas 77039
ATTRIBUTES
STOCK #:
01999
YEAR:
2018
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
MAST TYPE:
MAST HEIGHT:
86 / 186 in
SERIAL #:
AF13G01999
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
HOUR METER:
525
UNIT LOCATION:
Texas [77039]
POST DATE:
3/31/2026
Reviews
Useful
Not

The Mitsubishi FG30N forklift has been a solid addition to our warehouse operations. It’s surprisingly nimble for its size, which really comes in handy when we're navigating tight spaces. I remember the first time I hopped on it; I was a bit nervous since I hadn’t driven a forklift in a while, but it felt intuitive right off the bat. The visibility is great, which has helped me avoid a couple of close calls with stacked pallets—definitely a bonus. Overall, it’s reliable and gets the job done without a fuss. Would recommend it to anyone needing a sturdy workhorse for their team.


Review by Tom Henderson (10/31/2024)

  • General Specifications
    • Model Number: FG30N
    • Manufacturer: Mitsubishi
    • Type: Forklift
  • Dimensions
    • Overall Length (without forks): Approximately 8.5 feet
    • Overall Width: Approximately 4.1 feet
    • Overall Height (to top of overhead guard): Approximately 7 feet
    • Turning Radius: Approximately 8.2 feet
  • Engine
    • Engine Manufacturer: Mitsubishi
    • Engine Model: Included with FG30N
    • Fuel Type: Gasoline or LPG
    • Power Output: Variable, typically around 60 HP
  • Capacity
    • Load Capacity: 6,000 lbs
    • Load Center: 24 inches
  • Performance
    • Travel Speed (loaded): Approximately 11 mph
    • Lifting Speed (loaded): Approximately 110 feet per minute
  • Tires
    • Tire Type: Pneumatic or Solid (varies by configuration)
    • Front Tires: 28 inches (diameter)
    • Rear Tires: 18 inches (diameter)
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulics
    • Hydraulic System Pressure: Approximately 2,850 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following