Overview
Spec Sheet
Shipping/Freight
Equipment Description
Unit has not been started yet.
Spec Sheet
  • Model Details
    • Model Number: FG40N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type Used: LP Gas
  • Dimensions
    • Overall Length: Approximately 149 inches
    • Overall Width: Approximately 55 inches
    • Width (Overhead Guard): Approximately 57 inches
    • Overall Height (without overhead guard): Approximately 90 inches
    • Overall Height (with overhead guard): Approximately 87 inches
    • Turning Radius: Approximately 100 inches
    • Ground Clearance: Approximately 8 inches
  • Performance
    • Power Source: LP Gas
    • Lift Capacity: Approximately 8,000 lbs
    • Travel Speed (Loaded/Unloaded): Approximately 12/13 mph
    • Lifting Speed (Loaded/Unloaded): Approximately 98/105 feet per minute
    • Lowering Speed (Loaded/Unloaded): Approximately 98/98 feet per minute
  • Engine
    • Engine Model: Mitsubishi 4G63 LP Gas Engine
    • Piston Displacement: Approximately 2.4 liters
    • Rated Output: Approximately 50 HP at 2,400 RPM
    • Torque: Approximately 112 lb-ft at 1,600 RPM
  • Tires
    • Front Tires: Pneumatic
    • Rear Tires: Pneumatic
    • Number of Wheels: 4
  • Weight
    • Service Weight: Approximately 12,000 lbs
  • General
    • Operator Seat: Sit Down
    • Steering: Power Steering
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Warranty
45 Days Full / 6 Months Powertrain

2020 Mitsubishi FG40N

pneumatic tire 4 wheel sit down lp gas

$44,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Edward Tart
Phone:

ADDRESS
G&W Equipment Inc.
600 Lawton Rd
CharlotteNorth Carolina 28216
ATTRIBUTES
STOCK #:
EQ010622
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
90 / 187 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
562
UNIT LOCATION:
POST DATE:
3/12/2026
Reviews
Useful
Not

The Mitsubishi FG40N forklift is definitely a workhorse that’s been a game changer for our warehouse. After switching from our old gas forklift, it’s been refreshing to feel how smooth and responsive this one is, especially when stacking heavy loads. One thing I remember is a particularly hectic week when we were ramping up for our busy season; this forklift made maneuvering through tight spaces so much easier, and my team could keep up with the demand without breaking a sweat. I appreciate that it runs on LP gas too; the efficiency has made such a difference in our operating costs. Overall, it’s a solid choice for anyone needing reliable lift power.


Review by John Smith (1/12/2025)

  • Model Details
    • Model Number: FG40N
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type Used: LP Gas
  • Dimensions
    • Overall Length: Approximately 149 inches
    • Overall Width: Approximately 55 inches
    • Width (Overhead Guard): Approximately 57 inches
    • Overall Height (without overhead guard): Approximately 90 inches
    • Overall Height (with overhead guard): Approximately 87 inches
    • Turning Radius: Approximately 100 inches
    • Ground Clearance: Approximately 8 inches
  • Performance
    • Power Source: LP Gas
    • Lift Capacity: Approximately 8,000 lbs
    • Travel Speed (Loaded/Unloaded): Approximately 12/13 mph
    • Lifting Speed (Loaded/Unloaded): Approximately 98/105 feet per minute
    • Lowering Speed (Loaded/Unloaded): Approximately 98/98 feet per minute
  • Engine
    • Engine Model: Mitsubishi 4G63 LP Gas Engine
    • Piston Displacement: Approximately 2.4 liters
    • Rated Output: Approximately 50 HP at 2,400 RPM
    • Torque: Approximately 112 lb-ft at 1,600 RPM
  • Tires
    • Front Tires: Pneumatic
    • Rear Tires: Pneumatic
    • Number of Wheels: 4
  • Weight
    • Service Weight: Approximately 12,000 lbs
  • General
    • Operator Seat: Sit Down
    • Steering: Power Steering
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following