Overview
Spec Sheet
Shipping/Freight
Spec Sheet
  • Model Information
    • Model Number: 2C5000
    • Manufacturer: Caterpillar (Cat)
    • Type: Forklift
  • General Specifications
    • Power Type: LP Gas/Dual Fuel
    • Operator Type: Seated
    • Tires: Pneumatic
  • Dimensions
    • Overall Length: Approximately 141 inches (varies based on fork length)
    • Overall Width: 45.5 inches
    • Height to Top of Overhead Guard: 85 inches
    • Turning Radius: Approximately 89 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed Loaded/Unloaded: 11.2 mph / 11.8 mph
    • Lift Speed Loaded/Unloaded: 120 feet/min / 130 feet/min
  • Engine
    • Engine Model: K25
    • Engine Output: 58 hp
    • Number of Cylinders: 4
  • Weights
    • Service Weight: Approximately 8,300 lbs
  • Brakes
    • Brake Type: Hydraulic
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

Warranty
30 Days Full / 6 Months Powertrain / 1 Year Powertrain with 90 Day PM Agreement

2018 Cat 2C5000

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$9,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Edward Tart
Phone:

ADDRESS
G&W Equipment Inc.
425 Independence Blvd
Greenville South Carolina 29615
ATTRIBUTES
STOCK #:
G19646
YEAR:
2018
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
83 / 188 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
10018
UNIT LOCATION:
POST DATE:
3/8/2026
Reviews
Useful
Not

The Cat 2C5000 forklift is a reliable workhorse that's proven itself time and again on the job site. I remember using one during a busy warehouse renovation, and it handled the heavy loads with ease. Its maneuverability really stood out, especially when we had to navigate tight aisles filled with equipment. Even after a full day of use, it felt robust and didn't show signs of wear, which gave us confidence in our choice. If you're in the market for something dependable, this one certainly fits the bill.

Review by Mike Anderson

  • Model Information
    • Model Number: 2C5000
    • Manufacturer: Caterpillar (Cat)
    • Type: Forklift
  • General Specifications
    • Power Type: LP Gas/Dual Fuel
    • Operator Type: Seated
    • Tires: Pneumatic
  • Dimensions
    • Overall Length: Approximately 141 inches (varies based on fork length)
    • Overall Width: 45.5 inches
    • Height to Top of Overhead Guard: 85 inches
    • Turning Radius: Approximately 89 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed Loaded/Unloaded: 11.2 mph / 11.8 mph
    • Lift Speed Loaded/Unloaded: 120 feet/min / 130 feet/min
  • Engine
    • Engine Model: K25
    • Engine Output: 58 hp
    • Number of Cylinders: 4
  • Weights
    • Service Weight: Approximately 8,300 lbs
  • Brakes
    • Brake Type: Hydraulic
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following