Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: PF80YLP-NIS
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine: Nissan Dedicated LP Gas Engine
    • Engine Power: Various configurations available
  • Dimensions
    • Overall Length: Approximately 160 inches
    • Overall Width: Approximately 55 inches
    • Overall Height: Approximately 90 inches (to top of overhead guard)
    • Wheelbase: Approximately 80 inches
    • Ground Clearance: Approximately 5 inches
  • Capacity
    • Load Capacity: 8,000 lbs
    • Tilt Angle: Forward - Maximum 6 Degrees / Backward - Maximum 10 Degrees
  • Performance
    • Travel Speed: Up to 11 mph
    • Lift Speed: Varies with load
    • Turning Radius: Approximately 100 inches
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Dual pneumatic tires, approximately 28 inches in diameter
    • Rear Tires: Single pneumatic tires, approximately 20 inches in diameter
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Manual
  • Operator Environment
    • Steering: Hydrostatic power steering
    • Seat: Adjustable, with safety belt
    • Controls: Pilot-type hydraulic controls
  • Additional Features
    • Fuel Capacity: Varies depending on tank size
    • Optional Attachments: Various attachments available depending on application needs
    • Safety Features: Overhead guard, safety lights, audible alarms

2011 Nissan PF80YLP-NIS

pneumatic tire 4 wheel sit down

$28,900 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Bob Hennen
Phone:

ADDRESS
Quality Forklift Inc.
587 Citation Dr
ShakopeeMinnesota 55379
ATTRIBUTES
STOCK #:
0101025399
YEAR:
2011
Manufacturer:
MODEL #:
SERIAL #:
J1F4-980269
CONDITION:
Used
HOUR METER:
3697
UNIT LOCATION:
Minnesota [55379]
DESCRIPTION:
POST DATE:
3/6/2026
Reviews
Useful
Not

The Nissan PF80YLP-NIS forklift is a solid choice for anyone looking for reliability in a workhorse. Having used this model in several warehouse settings, I appreciate how comfortably it navigates tight spaces while still handling heavy loads like a champ. The LP gas fuel keeps the performance steady, which is essential when you're racing against the clock during a busy shift. Plus, the ergonomics of the seat are decent, which helps ease the strain after long hours behind the wheel. Overall, it strikes a good balance between power and maneuverability, making it a trustworthy partner in daily operations.



Review by Mike Johnson (8/4/2025)

  • General Information
    • Model Number: PF80YLP-NIS
    • Manufacturer: Nissan
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Engine
    • Engine: Nissan Dedicated LP Gas Engine
    • Engine Power: Various configurations available
  • Dimensions
    • Overall Length: Approximately 160 inches
    • Overall Width: Approximately 55 inches
    • Overall Height: Approximately 90 inches (to top of overhead guard)
    • Wheelbase: Approximately 80 inches
    • Ground Clearance: Approximately 5 inches
  • Capacity
    • Load Capacity: 8,000 lbs
    • Tilt Angle: Forward - Maximum 6 Degrees / Backward - Maximum 10 Degrees
  • Performance
    • Travel Speed: Up to 11 mph
    • Lift Speed: Varies with load
    • Turning Radius: Approximately 100 inches
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Dual pneumatic tires, approximately 28 inches in diameter
    • Rear Tires: Single pneumatic tires, approximately 20 inches in diameter
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Manual
  • Operator Environment
    • Steering: Hydrostatic power steering
    • Seat: Adjustable, with safety belt
    • Controls: Pilot-type hydraulic controls
  • Additional Features
    • Fuel Capacity: Varies depending on tank size
    • Optional Attachments: Various attachments available depending on application needs
    • Safety Features: Overhead guard, safety lights, audible alarms
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following