Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • Model Number: ACC80
  • Manufacturer: Allis Chalmers
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Dimensions
  • Overall Length: Approximately 150 inches (varies based on fork attachments)
  • Overall Width: 55 inches
  • Height to Top of Overhead Guard: 85 inches
  • Wheelbase: 90 inches
  • Ground Clearance: 5 inches
  • Weight
  • Gross Vehicle Weight: 15,500 lbs
  • Performance
  • Load Capacity: 8,000 lbs
  • Travel Speed with Load: 12 mph
  • Travel Speed without Load: 14 mph
  • Tires
  • Type: Pneumatic
  • Front Tires: 28 x 9-15
  • Rear Tires: 6.50 x 10
  • Engine
  • Fuel Type: LP Gas
  • Engine Power: 87 HP
  • Miscellaneous
  • Operator Type: Sit Down
  • Steering: Hydraulic Power Steering
  • Transmission: Powershift

Allis Chalmers ACC80

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$4,995 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Vincent
Phone:

ADDRESS
Pacific Coast Lift
PO Box 462532
EscondidoCalifornia 92046
ATTRIBUTES
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
California [92025]
POST DATE:
3/2/2026
Reviews
Useful
Not

The Allis Chalmers ACC80 forklift has really impressed me with its performance on the job site. I remember one day when we needed to move several heavy pallets around during a particularly busy shift, and this machine just made it look easy. The LP gas fuel option keeps it running smooth, and I’ve found it to be easy to control, which is a huge plus when navigating tight spaces. The pneumatic tires grip well and allow for stable handling, which is something I appreciate after dealing with some wobbly alternatives in the past. Overall, it’s reliable, and perfect for our warehouse's daily demands.



Review by Jake Thompson (5/16/2025)

  • Model Number: ACC80
  • Manufacturer: Allis Chalmers
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
  • Dimensions
  • Overall Length: Approximately 150 inches (varies based on fork attachments)
  • Overall Width: 55 inches
  • Height to Top of Overhead Guard: 85 inches
  • Wheelbase: 90 inches
  • Ground Clearance: 5 inches
  • Weight
  • Gross Vehicle Weight: 15,500 lbs
  • Performance
  • Load Capacity: 8,000 lbs
  • Travel Speed with Load: 12 mph
  • Travel Speed without Load: 14 mph
  • Tires
  • Type: Pneumatic
  • Front Tires: 28 x 9-15
  • Rear Tires: 6.50 x 10
  • Engine
  • Fuel Type: LP Gas
  • Engine Power: 87 HP
  • Miscellaneous
  • Operator Type: Sit Down
  • Steering: Hydraulic Power Steering
  • Transmission: Powershift
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following