Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
2011 Mitsubishi FD50CN-1, 10000 Lb Pneumatic Tire Forklift, Diesel Engine, Three Stage Mast, Side Shift, 72" Forks, Runs Great
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: FD50CN1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 172 inches
    • Overall Width: Approximately 73 inches
    • Overall Height: Approximately 104 inches
    • Wheelbase: Approximately 94 inches
    • Ground Clearance: Approximately 6.3 inches
  • Performance
    • Load Capacity: 11,000 lbs
    • Travel Speed: Approximately 12 mph
    • Turning Radius: Approximately 122 inches
  • Powertrain
    • Engine Power: Approximately 100 HP
    • Transmission: Powershift
    • Number of Speeds: 2 forward, 1 reverse
  • Tires
    • Type: Pneumatic
    • Front Tire Size: Approximately 8.25-15
    • Rear Tire Size: Approximately 8.25-15
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,600 psi
    • Hydraulic Flow Rate: Approximately 19 gallons per minute
  • Capacity
    • Fuel Tank Capacity: Approximately 26 gallons
    • Hydraulic Tank Capacity: Approximately 16 gallons
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 8 inches

2011 Mitsubishi FD50CN-1

pneumatic tire 4 wheel sit down diesel

$15,500 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Mike
Phone:

ADDRESS
Sun Equipment Inc
3517 Cantwell Blvd
Ft Wayne Indiana 46819
ATTRIBUTES
STOCK #:
29103
YEAR:
2011
Manufacturer:
MODEL #:
CAPACITY:
10000
FUEL:
MAST TYPE:
MAST HEIGHT:
89 / 189 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
4236
UNIT LOCATION:
Indiana [46819]
DESCRIPTION:
2011 Mitsubishi FD50CN-1, 10000 Lb Pneumatic Tire Forklift
POST DATE:
2/27/2026
Reviews
Useful
Not

The Mitsubishi FD50CN1 forklift has been a reliable workhorse on our job site. I've got to say, handling heavy loads with this diesel-powered sit-down model is a breeze. It feels sturdy on the ground, even when navigating uneven terrain. The pneumatic tires really give it an edge on rough surfaces, which is a game-changer when you’re moving pallets around outside. Watching my coworker ease it into tight spaces was impressive; the maneuverability is definitely a standout feature. It's not the flashiest forklift out there, but sometimes all you need is something dependable and tough, and this Mitsubishi delivers on that front. Overall, it’s become a staple in our fleet, and I can see it being a solid choice for anyone in the industry looking for durability without complications.



Review by Mike Anderson (10/13/2025)

  • General Specifications
    • Model Number: FD50CN1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: Diesel
  • Dimensions
    • Overall Length: Approximately 172 inches
    • Overall Width: Approximately 73 inches
    • Overall Height: Approximately 104 inches
    • Wheelbase: Approximately 94 inches
    • Ground Clearance: Approximately 6.3 inches
  • Performance
    • Load Capacity: 11,000 lbs
    • Travel Speed: Approximately 12 mph
    • Turning Radius: Approximately 122 inches
  • Powertrain
    • Engine Power: Approximately 100 HP
    • Transmission: Powershift
    • Number of Speeds: 2 forward, 1 reverse
  • Tires
    • Type: Pneumatic
    • Front Tire Size: Approximately 8.25-15
    • Rear Tire Size: Approximately 8.25-15
  • Hydraulic System
    • Hydraulic Pressure: Approximately 2,600 psi
    • Hydraulic Flow Rate: Approximately 19 gallons per minute
  • Capacity
    • Fuel Tank Capacity: Approximately 26 gallons
    • Hydraulic Tank Capacity: Approximately 16 gallons
  • Forks
    • Fork Length: Varies
    • Fork Width: Approximately 8 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following