Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: FCG25-3L
    • Manufacturer: TCM
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately 7.5 feet
    • Overall Width: Approximately 3.5 feet
    • Height to Top of Overhead Guard: Approximately 7 feet
    • Wheelbase: Approximately 4.5 feet
    • Minimum Ground Clearance: Approximately 3.9 inches
    • Tread Width Front: Approximately 3 feet
    • Tread Width Rear: Approximately 2.9 feet
  • Performance
    • Rated Load Capacity: Approximately 5,000 lbs
    • Travel Speed Loaded: Approximately 10 mph
    • Travel Speed Unloaded: Approximately 11 mph
    • Lifting Speed Loaded: Approximately 65 feet per minute
    • Lifting Speed Unloaded: Approximately 89 feet per minute
    • Drawbar Pull Loaded: Approximately 3,000 lbs
  • Engine Specifications
    • Engine Manufacturer: Nissan
    • Engine Model: K21
    • Number of Cylinders: 4
    • Displacement: Approximately 127 cubic inches
    • Maximum Torque: Approximately 113 lb-ft
    • Power Output: Approximately 48 hp
  • Weight
    • Unloaded Vehicle Weight: Approximately 9,000 lbs
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 21 x 7 x 15 inches
    • Rear Tire Size: 16 x 5 x 10.5 inches
  • Operational Details
    • Operator Position: Sit Down
    • Control: Manual/Powered
  • Forks
    • Fork Length: Varies

2007 TCM FCG25-3L

Buy or Rent

cushion tire 4 wheel sit down (indoor warehouse) diesel

Call for price

$135 USD per day

$540 USD per week

$1,465 USD per month

 
CONTACT INFO
Name:
Sales Dept

ADDRESS
1 Source Material Handling, Inc.
15519 Arrow Highway
IrwindaleCalifornia 91706
ATTRIBUTES
STOCK #:
U07111138
YEAR:
2007
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
82 / 189 in
SERIAL #:
A47F01505
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
HOUR METER:
8213
UNIT LOCATION:
California [91706]
POST DATE:
8/17/2026
Reviews
Useful
Not

The TCM FCG25-3L forklift is a solid choice for indoor warehouse work, showing great balance and ease of maneuverability. Having spent some time operating one at a local distribution center, I was impressed by how smooth it handled tight spaces, making it feel almost intuitive. The LP gas engine provided reliable power without the noise you'd expect from larger machinery, which really helps keep the workspace comfortable. Whether it was lifting pallets or navigating narrow aisles, this forklift managed to get the job done effectively. Overall, it's a dependable piece of equipment that stands up to everyday demands without a fuss.



Review by Jake Thompson (8/25/2025)

  • General Information
    • Model Number: FCG25-3L
    • Manufacturer: TCM
    • Type: Forklift
    • Subtype: Cushion Tire 4 Wheel Sit Down (Indoor Warehouse)
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately 7.5 feet
    • Overall Width: Approximately 3.5 feet
    • Height to Top of Overhead Guard: Approximately 7 feet
    • Wheelbase: Approximately 4.5 feet
    • Minimum Ground Clearance: Approximately 3.9 inches
    • Tread Width Front: Approximately 3 feet
    • Tread Width Rear: Approximately 2.9 feet
  • Performance
    • Rated Load Capacity: Approximately 5,000 lbs
    • Travel Speed Loaded: Approximately 10 mph
    • Travel Speed Unloaded: Approximately 11 mph
    • Lifting Speed Loaded: Approximately 65 feet per minute
    • Lifting Speed Unloaded: Approximately 89 feet per minute
    • Drawbar Pull Loaded: Approximately 3,000 lbs
  • Engine Specifications
    • Engine Manufacturer: Nissan
    • Engine Model: K21
    • Number of Cylinders: 4
    • Displacement: Approximately 127 cubic inches
    • Maximum Torque: Approximately 113 lb-ft
    • Power Output: Approximately 48 hp
  • Weight
    • Unloaded Vehicle Weight: Approximately 9,000 lbs
  • Tires
    • Tire Type: Cushion
    • Front Tire Size: 21 x 7 x 15 inches
    • Rear Tire Size: 16 x 5 x 10.5 inches
  • Operational Details
    • Operator Position: Sit Down
    • Control: Manual/Powered
  • Forks
    • Fork Length: Varies
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following