Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: FG50K1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 163 inches (depending on mast and forks)
    • Overall Width: 58.3 inches
    • Overall Height (with cabin): Approximately 101 inches
    • Wheelbase: 86.6 inches
    • Ground Clearance: 5.5 inches
  • Performance
    • Load Capacity: 10,000 lbs
    • Travel Speed: Approximately 12.5 mph (laden)
    • Lifting Speed: Approximately 98 feet per minute (laden)
    • Gradeability: 27% (laden)
    • Turning Radius: 101 inches
  • Powertrain
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG / Gasoline
    • Horsepower: Approximately 97 HP at 2,300 RPM
    • Transmission: Automatic Powershift
  • Chassis
    • Tire Type: Pneumatic
    • Front Tires: 8.25 x 15 – 14PR
    • Rear Tires: 6.50 – 10 – 10PR
  • Hydraulics
    • Hydraulic System Pressure: 2,560 psi
  • Forks
    • Fork Length: Varies
    • Fork Thickness: 2 inches
    • Fork Width: 6 inches

2005 Mitsubishi FG50K1

pneumatic tire 4 wheel sit down lp gas

Call for price
 
CONTACT INFO
Name:
Wholesale
Phone:

ADDRESS
Atlas International Lift Trucks
1850 Touhy Ave.
Elk Grove VillageIllinois 60007
ATTRIBUTES
STOCK #:
11M531
YEAR:
2005
Manufacturer:
MODEL #:
CAPACITY:
11000
FUEL:
MAST TYPE:
MAST HEIGHT:
93 / 189 in
CONDITION:
Used
HOUR METER:
7241
UNIT LOCATION:
Illinois [60007]
DESCRIPTION:
POST DATE:
9/11/2026
Reviews
Useful
Not

The Mitsubishi FG50K1 forklift has been a game changer at our warehouse. I've worked on a few different models before, but this one really stands out with its solid handling and smooth ride, especially when navigating tight spaces. It's been great during those busy afternoon shifts when we’re rushing to fulfill orders; the responsiveness of the controls makes all the difference. I remember one particularly hectic day when we had a shipment arrive late, and the FG50K1 helped us catch up without breaking a sweat. Overall, it’s a reliable workhorse that seems to be built to last, making long shifts a lot easier to manage.



Review by Jake Thompson (5/11/2025)

  • General Specifications
    • Model Number: FG50K1
    • Manufacturer: Mitsubishi
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 163 inches (depending on mast and forks)
    • Overall Width: 58.3 inches
    • Overall Height (with cabin): Approximately 101 inches
    • Wheelbase: 86.6 inches
    • Ground Clearance: 5.5 inches
  • Performance
    • Load Capacity: 10,000 lbs
    • Travel Speed: Approximately 12.5 mph (laden)
    • Lifting Speed: Approximately 98 feet per minute (laden)
    • Gradeability: 27% (laden)
    • Turning Radius: 101 inches
  • Powertrain
    • Engine Type: Internal Combustion Engine
    • Fuel Type: LPG / Gasoline
    • Horsepower: Approximately 97 HP at 2,300 RPM
    • Transmission: Automatic Powershift
  • Chassis
    • Tire Type: Pneumatic
    • Front Tires: 8.25 x 15 – 14PR
    • Rear Tires: 6.50 – 10 – 10PR
  • Hydraulics
    • Hydraulic System Pressure: 2,560 psi
  • Forks
    • Fork Length: Varies
    • Fork Thickness: 2 inches
    • Fork Width: 6 inches
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following