Overview
Spec Sheet
Shipping/Freight
Equipment Description
Triple 83.5/186, SS/FP, 42" forks, 3769 hrs
Spec Sheet
  • General Information
    • Model Number: H35FT
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 148 inches
    • Overall Width: Approximately 46 inches
    • Overall Height: Approximately 84 inches
    • Wheelbase: Approximately 66 inches
    • Ground Clearance: Approximately 5 inches under the mast and 9 inches at center of wheelbase
  • Engine
    • Engine Model: PSI 2.4L
    • Fuel Type: LPG/Dual Fuel (Gasoline/LP Gas)
  • Performance
    • Load Capacity: 3,500 lbs
    • Travel Speed: Approximately 11.5 mph (loaded)
    • Drive: 2WD
    • Turning Radius: Approximately 85 inches
  • Transmission
    • Type: Powershift
    • Speeds: 1 Forward / 1 Reverse
  • Hydraulics
    • Hydraulic Pressure: 2,300 psi
    • Hydraulic Tank Capacity: Approximately 9 gallons
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 7.00-12
    • Tire Size Rear: 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Hand operated
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2020 Hyster H35FT

pneumatic tire 4 wheel sit down lp gas

$18,200 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Ed Mora
Phone:

ADDRESS
Lift Mart International
518 Nafta Blvd Suite A
Laredo Texas 79045
ATTRIBUTES
STOCK #:
LMI-631
YEAR:
2020
Manufacturer:
MODEL #:
CAPACITY:
3500
FUEL:
MAST TYPE:
MAST HEIGHT:
83.5 / 186 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
3769
UNIT LOCATION:
DESCRIPTION:
Triple 83.5/186, SS/FP, 42" forks, 3769 hrs
POST DATE:
2/10/2026
Reviews
Useful
Not

The Hyster H35FT forklift has been a solid performer in our warehouse operations. It's easy to maneuver, even in tight spaces, which I appreciated when we were reorganizing the storage layout last month. The pneumatic tires provide a smooth ride, making it comfortable for those long shifts. I've noticed that its reliability really shines during our busiest days when we have to move pallets non-stop. It hasn't let us down yet, and that's always a plus when you're racing against the clock. Overall, it's a dependable workhorse that gets the job done without fuss.


Review by Mike Anderson (11/16/2024)

  • General Information
    • Model Number: H35FT
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 148 inches
    • Overall Width: Approximately 46 inches
    • Overall Height: Approximately 84 inches
    • Wheelbase: Approximately 66 inches
    • Ground Clearance: Approximately 5 inches under the mast and 9 inches at center of wheelbase
  • Engine
    • Engine Model: PSI 2.4L
    • Fuel Type: LPG/Dual Fuel (Gasoline/LP Gas)
  • Performance
    • Load Capacity: 3,500 lbs
    • Travel Speed: Approximately 11.5 mph (loaded)
    • Drive: 2WD
    • Turning Radius: Approximately 85 inches
  • Transmission
    • Type: Powershift
    • Speeds: 1 Forward / 1 Reverse
  • Hydraulics
    • Hydraulic Pressure: 2,300 psi
    • Hydraulic Tank Capacity: Approximately 9 gallons
  • Tires
    • Tire Type: Pneumatic
    • Tire Size Front: 7.00-12
    • Tire Size Rear: 6.00-9
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Hand operated
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following