Overview
Spec Sheet
Videos
Shipping/Freight
Equipment Description
#2810 LOW HOUR 2008 Hyster H50FT, 5,000 lb. Pneumatic tire forklift with smooth running LP gas engine, lever shift automatic transmission, 189” triple stage mast, side-shift carriage, 42” pallet forks, good solid pneumatic tires, New PM service and recent paint job!! This forklift has under 3,300 hours!!
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Manufacturer: Hyster
    • Model: H50FT
    • Type: Forklift
    • Power Source: Internal combustion (diesel, LPG, or gasoline)
    • Operator Position: Seated
  • Dimensions
    • Overall Width: Approximately 3.9 feet
    • Overall Length (without forks): Approximately 8.5 feet
    • Overall Height (cab): Approximately 7 feet
    • Wheelbase: Approximately 5.4 feet
    • Ground Clearance: Approximately 5.5 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11 mph / 12 mph
    • Lift Speed (laden/unladen): Approximately 110 feet per minute / 120 feet per minute
    • Gradeability (laden): Approximately 26%
    • Gradeability (unladen): Approximately 34%
  • Engine
    • Engine Type: Kubota or GM
    • Fuel Type: Diesel, LPG, or gasoline
    • Power Output: Varies (typically around 63 HP for diesel or 59 HP for LPG/gasoline)
  • Chassis
    • Steering: Hydrostatic power steering
    • Brakes: Hydraulic, wet disc
    • Tires: Pneumatic or cushion
  • Hydraulic System
    • Pump Type: Gear type
    • Hydraulic Pressure: Approximately 2500 psi
  • Additional Features
    • Adjustable steering column
    • Comfortable operator's seat with suspension
    • Standard safety features such as seatbelt and warning lights

2008 Hyster H50FT

Buy or Rent

pneumatic tire 4 wheel sit down lp gas

$22,995 USD

$275 USD per day

$785 USD per week

$1,860 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Aidan MacKenzie
Phone:

ADDRESS
Western Material Handling
1113 N College Ave
Fort CollinsColorado 80524
ATTRIBUTES
STOCK #:
2810
YEAR:
2008
Manufacturer:
MODEL #:
CAPACITY:
5000
FUEL:
MAST TYPE:
MAST HEIGHT:
189 in
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
HOUR METER:
3270
UNIT LOCATION:
Colorado [80524]
DESCRIPTION:
2810 LOW HOUR HYSTER H50FT 5K SOLID PNEU 3STG SS LP
POST DATE:
2/9/2026
Reviews
Useful
Not

The H50FT forklift from Hyster really impressed me during my time at the warehouse. It felt like a sturdy companion while navigating through tight aisles and lifting heavy loads. I remember the first time I drove it; the smooth controls made it easier than I expected. Not to mention, that it rarely needed repairs, which saved us a lot of headaches in the long run. It’s nice not to constantly worry about downtime when you have a reliable machine like this on your side. For anyone in the market for a dependable forklift, I’d definitely recommend checking this one out.


Review by James Carter (1/17/2025)

  • General Specifications
    • Manufacturer: Hyster
    • Model: H50FT
    • Type: Forklift
    • Power Source: Internal combustion (diesel, LPG, or gasoline)
    • Operator Position: Seated
  • Dimensions
    • Overall Width: Approximately 3.9 feet
    • Overall Length (without forks): Approximately 8.5 feet
    • Overall Height (cab): Approximately 7 feet
    • Wheelbase: Approximately 5.4 feet
    • Ground Clearance: Approximately 5.5 inches
  • Performance
    • Load Capacity: 5,000 lbs
    • Travel Speed (laden/unladen): Approximately 11 mph / 12 mph
    • Lift Speed (laden/unladen): Approximately 110 feet per minute / 120 feet per minute
    • Gradeability (laden): Approximately 26%
    • Gradeability (unladen): Approximately 34%
  • Engine
    • Engine Type: Kubota or GM
    • Fuel Type: Diesel, LPG, or gasoline
    • Power Output: Varies (typically around 63 HP for diesel or 59 HP for LPG/gasoline)
  • Chassis
    • Steering: Hydrostatic power steering
    • Brakes: Hydraulic, wet disc
    • Tires: Pneumatic or cushion
  • Hydraulic System
    • Pump Type: Gear type
    • Hydraulic Pressure: Approximately 2500 psi
  • Additional Features
    • Adjustable steering column
    • Comfortable operator's seat with suspension
    • Standard safety features such as seatbelt and warning lights
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following