Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
17500 LBS @ 36" LC FULL CAB WITH A/C SOLID PNEUMATIC TIRES
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Model Number: H175FT
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 11 to 12 feet (varies depending on configuration)
    • Overall Width: 5.5 feet
    • Wheelbase: 7.5 feet
    • Ground Clearance: 6.5 inches at center of wheelbase
  • Powertrain
    • Engine Type: Diesel or LPG options available
    • Engine Power: Approximately 100 to 120 HP depending on engine option
    • Transmission Type: Powershift
    • Number of Speeds: 2 Forward / 1 Reverse
  • Performance
    • Load Capacity: 17,500 lbs
    • Travel Speed: 12 to 15 mph unloaded
    • Lift Speed: Approximately 70 feet/minute (varies depending on load)
    • Gradeability: Up to 21% at full load
  • Hydraulics
    • Hydraulic System Pressure: 3000 psi
    • Hydraulic Controls: Fingertip control levers
  • Tires
    • Tire Type: Pneumatic
    • Tire Front Size: 8.25-15
    • Tire Rear Size: 8.25-15
  • Operator's Compartment
    • Steering: Hydraulic power steering
    • Seat: Ergonomic with lumbar support, adjustable
    • Instrumentation: Full integrated digital display
  • Electrical System
    • Voltage: 12 volts
    • Battery Capacity: Conventional automotive battery

2015 Hyster H175FT

pneumatic tire 4 wheel sit down diesel

Call for price
 
CONTACT INFO
Name:
Richard Wroble
Phone:

ADDRESS
Trivium Equipment
2451 W Peterson Dr.
Apache JunctionArizona 85120
ATTRIBUTES
YEAR:
2015
Manufacturer:
MODEL #:
CAPACITY:
17500
FUEL:
MAST TYPE:
MAST HEIGHT:
139 / 179 in
SIDE SHIFTER:
Yes
CONDITION:
Used
UNIT LOCATION:
Arizona [85120]
DESCRIPTION:
CUSTOMER READY!
POST DATE:
8/6/2026
Reviews
Useful
Not

The Hyster H175FT is a solid choice for anyone in need of a reliable forklift. Having spent a few months using it at our warehouse, I can say it delivers a smooth performance, even when handling heavier loads. The pneumatic tires genuinely make a difference, providing good traction on our sometimes uneven floor. I remember a day when we had to move quite a bit of inventory in a tight timeframe, and this forklift really came through for us, allowing maneuverability without any fuss. You can tell Hyster designed it with user comfort in mind—operating it feels intuitive, which is a huge help on long shifts. It’s definitely worth considering if you’re looking to invest in equipment that won't let you down.



Review by Jake Thompson (3/6/2025)

  • General Information
    • Model Number: H175FT
    • Manufacturer: Hyster
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 11 to 12 feet (varies depending on configuration)
    • Overall Width: 5.5 feet
    • Wheelbase: 7.5 feet
    • Ground Clearance: 6.5 inches at center of wheelbase
  • Powertrain
    • Engine Type: Diesel or LPG options available
    • Engine Power: Approximately 100 to 120 HP depending on engine option
    • Transmission Type: Powershift
    • Number of Speeds: 2 Forward / 1 Reverse
  • Performance
    • Load Capacity: 17,500 lbs
    • Travel Speed: 12 to 15 mph unloaded
    • Lift Speed: Approximately 70 feet/minute (varies depending on load)
    • Gradeability: Up to 21% at full load
  • Hydraulics
    • Hydraulic System Pressure: 3000 psi
    • Hydraulic Controls: Fingertip control levers
  • Tires
    • Tire Type: Pneumatic
    • Tire Front Size: 8.25-15
    • Tire Rear Size: 8.25-15
  • Operator's Compartment
    • Steering: Hydraulic power steering
    • Seat: Ergonomic with lumbar support, adjustable
    • Instrumentation: Full integrated digital display
  • Electrical System
    • Voltage: 12 volts
    • Battery Capacity: Conventional automotive battery
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following