Overview
Spec Sheet
Shipping/Freight
Equipment Description
#D20472 Oldie but Goodie Clark, 8,000 lb. Cushion tire forklift with Continental 6-cylinder flat-head LP gas engine, automatic transmission with high/low, 188” triple stage mast, 42” pallet forks, traction drive tires with smooth steer tires, New PM service! Great forklift for a starting a marble operation!
Video: https://youtu.be/32oGmLY04Eg
?si=glVll7oYcH6NNkTS
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Specifications
    • Model Number: C80
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately varies depending on specific configuration
    • Overall Width: Approximately 55 inches
    • Height to Top Overhead Guard: Approximately 93 inches
    • Wheelbase: Approximately 82 inches
    • Ground Clearance: Approximately 5 inches
  • Performance
    • Load Capacity: Approximately 16,000 lbs
    • Travel Speed: Approximately 16 mph (unladen)
    • Lift Speed: Approximately 100 feet per minute (unladen)
    • Gradeability: Approximately 27% (laden)
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
    • Horsepower: Approximately 97 HP
  • Tires
    • Type: Pneumatic
    • Tire Size Front: Approximately 28 x 12 - 22
    • Tire Size Rear: Approximately 8.25 x 15
  • Other Features
    • Operator Compartment: Ergonomic Design
    • Seat: Adjustable with Suspension
    • Steering: Hydraulic Power Steering
    • Brakes: Hydraulic Drum

Clark C80

Buy or Rent

cushion tire 4 wheel sit down (indoor warehouse) lp gas

$4,995 USD

$405 USD per day

$1,025 USD per week

$2,280 USD per month

 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Dennis Firkins
Phone:

ADDRESS
Western Material Handling
5678 Eudora St
Commerce CityColorado 80022
ATTRIBUTES
STOCK #:
D20472
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
188 in
SIDE SHIFTER:
No
CONDITION:
Used/Rental
UNIT LOCATION:
Colorado [80022]
DESCRIPTION:
D20472 AWESOME OLDIE CLARK C80 8K CUSH 3STG HI/LOW TRANS.
POST DATE:
1/28/2026
Reviews
Useful
Not

I've spent a fair amount of time getting familiar with the Clark C80 forklift, and it's really made a difference in our warehouse's efficiency. The LP gas engine provides a solid power level that gets the job done without being a gas guzzler, which is great because we have to keep an eye on costs. I remember one hectic day when we had a massive shipment to unload, and this forklift handled everything like a breeze. Its maneuverability is surprisingly good for a sit-down model, making tight turns and navigating crowded aisles a lot easier. Overall, it's a reliable workhorse that doesn’t demand too much attention, allowing me to focus on getting the job done.



Review by Jake Thompson (1/14/2025)

  • General Specifications
    • Model Number: C80
    • Manufacturer: Clark
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Dimensions
    • Overall Length: Approximately varies depending on specific configuration
    • Overall Width: Approximately 55 inches
    • Height to Top Overhead Guard: Approximately 93 inches
    • Wheelbase: Approximately 82 inches
    • Ground Clearance: Approximately 5 inches
  • Performance
    • Load Capacity: Approximately 16,000 lbs
    • Travel Speed: Approximately 16 mph (unladen)
    • Lift Speed: Approximately 100 feet per minute (unladen)
    • Gradeability: Approximately 27% (laden)
  • Engine
    • Engine Type: Internal Combustion
    • Fuel Type: LP Gas
    • Horsepower: Approximately 97 HP
  • Tires
    • Type: Pneumatic
    • Tire Size Front: Approximately 28 x 12 - 22
    • Tire Size Rear: Approximately 8.25 x 15
  • Other Features
    • Operator Compartment: Ergonomic Design
    • Seat: Adjustable with Suspension
    • Steering: Hydraulic Power Steering
    • Brakes: Hydraulic Drum
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following