Overview
Spec Sheet
Shipping/Freight
Equipment Description
Gently used demo unit with minimal hours
Spec Sheet
  • General Specifications
    • Model Number: GP40N
    • Manufacturer: Caterpillar (Cat)
    • Type: Forklift
    • Power Source: LPG (Liquefied Petroleum Gas)
  • Dimensions
    • Overall Length: Approx. 137.8 inches (varies with fork length)
    • Overall Width: Approx. 55.1 inches
    • Overall Height (Cab): Approx. 89.8 inches
    • Wheelbase: Approx. 71.3 inches
    • Ground Clearance: Approx. 4.3 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Load Center: 24 inches
    • Travel Speed: Approx. 11.2 mph (loaded)
    • Lifting Speed: Approx. 94 ft/min (loaded)
    • Gradeability: Approx. 27% (loaded)
  • Engine
    • Engine Model: Mitsubishi 4G64
    • Engine Power: Approx. 51 HP
    • Cylinders: 4
    • Fuel Tank Capacity: Approx. 8.5 gallons
  • Chassis
    • Drive Type: 2WD
    • Tire Type: Pneumatic
    • Tires: Front - 28 x 9-15, Rear - 6.50-10
    • Service Brakes: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulics
    • Hydraulic System Type: Open Center
    • Hydraulic Pump Capacity: Approx. 15.2 gallons/min
    • Auxiliary Hydraulic Valve: Standard
  • Operator Comfort
    • Seat Type: Full suspension seat
    • Steering: Hydraulic power steering
    • Noise Level: Approx. 79 dB(A)
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2025 Cat GP40N

Buy or Rent

pneumatic tire 4 wheel sit down lp gas

$53,890 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Quentin Murdock
Phone:

ADDRESS
Naumann Hobbs Material Handling
8575 Cherry Av
FontanaCalifornia 92335
ATTRIBUTES
YEAR:
2025
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
90 / 187 in
SIDE SHIFTER:
No
CONDITION:
Used/Rental
HOUR METER:
100
UNIT LOCATION:
California [92335]
DESCRIPTION:
2025 CAT GP40N
POST DATE:
1/21/2026
Reviews
Useful
Not

The Cat GP40N forklift has been a real workhorse for us on the job site. I remember the first time we used it to move heavy pallets around—what a game changer! It's tough, reliable, and really easy to maneuver, even in tight spaces. The visibility is solid, which helps a lot when you're stacking. My buddy who runs the loading dock has also praised its smooth operation compared to other models we’ve tried, making long days feel a bit shorter. All in all, it’s a dependable piece of equipment that gets the job done without any fuss.



Review by Mike Johnson (9/9/2024)

  • General Specifications
    • Model Number: GP40N
    • Manufacturer: Caterpillar (Cat)
    • Type: Forklift
    • Power Source: LPG (Liquefied Petroleum Gas)
  • Dimensions
    • Overall Length: Approx. 137.8 inches (varies with fork length)
    • Overall Width: Approx. 55.1 inches
    • Overall Height (Cab): Approx. 89.8 inches
    • Wheelbase: Approx. 71.3 inches
    • Ground Clearance: Approx. 4.3 inches
  • Performance
    • Load Capacity: 8,000 lbs
    • Load Center: 24 inches
    • Travel Speed: Approx. 11.2 mph (loaded)
    • Lifting Speed: Approx. 94 ft/min (loaded)
    • Gradeability: Approx. 27% (loaded)
  • Engine
    • Engine Model: Mitsubishi 4G64
    • Engine Power: Approx. 51 HP
    • Cylinders: 4
    • Fuel Tank Capacity: Approx. 8.5 gallons
  • Chassis
    • Drive Type: 2WD
    • Tire Type: Pneumatic
    • Tires: Front - 28 x 9-15, Rear - 6.50-10
    • Service Brakes: Hydraulic
    • Parking Brake: Mechanical
  • Hydraulics
    • Hydraulic System Type: Open Center
    • Hydraulic Pump Capacity: Approx. 15.2 gallons/min
    • Auxiliary Hydraulic Valve: Standard
  • Operator Comfort
    • Seat Type: Full suspension seat
    • Steering: Hydraulic power steering
    • Noise Level: Approx. 79 dB(A)
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following