Overview
Spec Sheet
Shipping/Freight
Equipment Description
2007 Toyota 7FDU80 15,000# Capacity 2-Stage Mast, 132" Lift Height Plain Carriage, 48" Forks Diesel Engine 12,873 Hours
Spec Sheet
  • Manufacturer: Toyota
  • Model Number: 7FDU80
  • Type: Forklift
  • Engine
    • Engine Model: Diesel
    • Engine Power: Approximately 52 kW (70 HP)
    • Cylinder Count: 4
    • Aspiration: Turbocharged
  • Dimensions
    • Overall Length: 158 inches
    • Overall Width: 68 inches
    • Overall Height: 109 inches
    • Wheelbase: 78 inches
  • Weight
    • Service Weight: 25,000 lbs
  • Performance
    • Load Capacity: 17,500 lbs
    • Travel Speed: 13 mph
    • Lift Speed: 79 feet per minute
    • Turning Radius: Approximately 100 inches
  • Tyres
    • Type: Pneumatic
    • Front Tyres: Dual
    • Rear Tyres: Single
  • Transmission
    • Transmission Type: Powershift
    • Gears: 2 Forward / 2 Reverse
  • Fork
    • Fork Length: Varies
  • Hydraulic System
    • Hydraulic System Pressure: 1980 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2007 Toyota 7FDU80

pneumatic tire 4 wheel sit down diesel

$35,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Cody Griffis
Phone:

ADDRESS
Southeast Forklifts
2121 East Freeway
BaytownTexas 77521
ATTRIBUTES
STOCK #:
150118252704
YEAR:
2007
Manufacturer:
MODEL #:
CAPACITY:
15000
FUEL:
MAST TYPE:
MAST HEIGHT:
132 in
CONDITION:
Used
HOUR METER:
12873
LOCATION:
Texas [77521]
POST DATE:
1/9/2026
Reviews
Useful
Not

The Toyota 7FDU80 forklift feels like a solid workhorse that’s meant to last. I remember using one at a warehouse job where we had to maneuver through tight spaces, and it really impressed me with its agility and stability. It lifted heavy loads without much hassle, which made those long shifts a little more bearable. I’ve seen other guys struggle with less reliable equipment, but this unit just got the job done, day in and day out. If you need something dependable for tough environments, this forklift could be a smart choice.



Review by Mark Henderson (1/10/2025)

  • Manufacturer: Toyota
  • Model Number: 7FDU80
  • Type: Forklift
  • Engine
    • Engine Model: Diesel
    • Engine Power: Approximately 52 kW (70 HP)
    • Cylinder Count: 4
    • Aspiration: Turbocharged
  • Dimensions
    • Overall Length: 158 inches
    • Overall Width: 68 inches
    • Overall Height: 109 inches
    • Wheelbase: 78 inches
  • Weight
    • Service Weight: 25,000 lbs
  • Performance
    • Load Capacity: 17,500 lbs
    • Travel Speed: 13 mph
    • Lift Speed: 79 feet per minute
    • Turning Radius: Approximately 100 inches
  • Tyres
    • Type: Pneumatic
    • Front Tyres: Dual
    • Rear Tyres: Single
  • Transmission
    • Transmission Type: Powershift
    • Gears: 2 Forward / 2 Reverse
  • Fork
    • Fork Length: Varies
  • Hydraulic System
    • Hydraulic System Pressure: 1980 psi
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following