Overview
Spec Sheet
Shipping/Freight
Equipment Description
Warranty 60 months Attachments Side shift Additional Equipment 3rd valve
Spec Sheet
  • Model Number: PF80LP
  • Manufacturer: Unicarriers
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
Capacity
  • Load Capacity: 8,000 lbs
Dimensions
  • Overall Length: 123 inches (varies with fork length)
  • Overall Width: 55 inches
  • Overall Height: 88 inches
  • Wheelbase: 73 inches
  • Ground Clearance: 5.5 inches
Performance
  • Travel Speed (loaded): 12 mph
  • Lifting Speed (loaded): 70 feet per minute
  • Lowering Speed (loaded): 90 feet per minute
  • Gradeability (loaded): 26%
Engine
  • Engine Type: Internal Combustion
  • Engine Model: QD32
  • Rated Power: 59 hp
  • Displacement: 195 cubic inches
Chassis
  • Tire Type: Pneumatic
  • Tire Size (front): 28 x 9-15
  • Tire Size (rear): 6.50-10
Additional Features
  • Operator Compartment: Sit Down
  • Controls: Hydraulic levers
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2025 Unicarriers PF80LP

pneumatic tire 4 wheel sit down lp gas

$63,999 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Jake Patterson

ADDRESS
Patterson Lift Trucks Inc
975 Industrial Parkway
West HaywardCalifornia 94544
ATTRIBUTES
STOCK #:
T2350
YEAR:
2025
Manufacturer:
MODEL #:
CAPACITY:
8000
FUEL:
MAST TYPE:
MAST HEIGHT:
90 / 187 in
SIDE SHIFTER:
Yes
CONDITION:
Used
LOCATION:
California [94544]
DESCRIPTION:
4893952
POST DATE:
1/8/2026
Reviews
Useful
Not

The Unicarriers PF80LP forklift really impressed me during my time at the warehouse. It felt solid and stable, which is a huge plus when you’re moving heavy loads around. The LP gas engine provided plenty of power, and I appreciated how smooth the operation was—no jerky movements that can lead to accidents. On days when I worked long shifts, the comfortable seat made a noticeable difference, keeping me focused rather than sore. Overall, it’s a reliable machine that gets the job done without a fuss, which is what everyone looks for in a forklift.


Review by Jake Thompson (8/11/2024)

  • Model Number: PF80LP
  • Manufacturer: Unicarriers
  • Type: Forklift
  • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Fuel Type: LP Gas
Capacity
  • Load Capacity: 8,000 lbs
Dimensions
  • Overall Length: 123 inches (varies with fork length)
  • Overall Width: 55 inches
  • Overall Height: 88 inches
  • Wheelbase: 73 inches
  • Ground Clearance: 5.5 inches
Performance
  • Travel Speed (loaded): 12 mph
  • Lifting Speed (loaded): 70 feet per minute
  • Lowering Speed (loaded): 90 feet per minute
  • Gradeability (loaded): 26%
Engine
  • Engine Type: Internal Combustion
  • Engine Model: QD32
  • Rated Power: 59 hp
  • Displacement: 195 cubic inches
Chassis
  • Tire Type: Pneumatic
  • Tire Size (front): 28 x 9-15
  • Tire Size (rear): 6.50-10
Additional Features
  • Operator Compartment: Sit Down
  • Controls: Hydraulic levers
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following