Eliftruck
BUY A FORKLIFT SELL A FORKLIFT RENT A FORKLIFT
Overview
Spec Sheet
Shipping/Freight
Equipment Description
3494 Hours 2019 used HYUNDAI 45D-9 for sale. Global has over 2000 pieces of used equipment in stock. Inquire today about Stock #RF-6145, Stock Number: RF-6145, Make: HYUNDAI, Model: 45D-9, Year: 2019, Auxilliary Hydralic Valves: 0, Capacity: 10000 Lbs, Carriage: SSFP, Carriage Width: 53.00", Fork Length: 48.00", Fork Taper: 2 Stage Lumber, Fork Thickness: 1.50", Fork Width: 7.80", Full Free Height: 0.00", Load Center: 24", Mast: Simplex, Max Fork Height: 177.00", Overall Lowered Height: 118.00", Operator Protection: Enclosed Cab, Rear Tires: Solid Pneumatic, Hours: 3494, Chassis: 2 Wheel Drive, Fuel: Diesel
Spec Sheet
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

  • General Information
    • Manufacturer: Hyundai
    • Model Number: 45D-9
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: 139.8 inches
    • Width: 55.7 inches
    • Height to Top of Overhead Guard: 90.6 inches
  • Weight
    • Operating Weight: 16,755 lbs
  • Performance
    • Load Capacity: 9,920 lbs
    • Load Center: 24 inches
    • Travel Speed: 11.8 mph
    • Lifting Speed: 98 feet per minute
  • Powertrain
    • Engine: Cummins QSF3.8 Tier 4 Final
    • Engine Power: 74 horsepower
    • Transmission: Hydraulic Automatic
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: 8.25-15-14PR
    • Rear Tires: 6.50-10-10PR
  • Operator Environment
    • Seat: Adjustable ergonomic seat
    • Steering: Tilt steering column
    • Display: Multifunctional LCD display
  • Hydraulic System
    • Pump Capacity: 21.1 gallons per minute
    • Control Valve Type: Load Sensing

2019 Hyundai 45D-9

pneumatic tire 4 wheel sit down diesel

$42,000 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales Rep

ADDRESS
Global Fleet Solutions
17300 W Valley Hwy
SeattleWashington 98188
ATTRIBUTES
STOCK #:
RF-6145
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
10000
FUEL:
MAST TYPE:
MAST HEIGHT:
177 in
SERIAL #:
HHKHFV27JK0001223
SIDE SHIFTER:
Yes
HOUR METER:
3494
UNIT LOCATION:
POST DATE:
8/3/2026
Reviews
Useful
Not

The Hyundai 45D-9 forklift has been a solid performer in our warehouse operations. I remember the first time I got behind the wheel; it felt intuitive and easy to handle right from the start. The pneumatic tires really do make a difference when navigating our uneven surfaces, which was a lifesaver during that busy season when we had to speed up deliveries. Plus, it has the power to lift heavier loads without breaking a sweat, which has made our team’s job a lot easier. While it's not the flashiest piece of equipment, it gets the job done with reliability and efficiency. Overall, I'd say it's a dependable choice for anyone looking for a sturdy sit down forklift.



Review by Jake Thompson (4/5/2025)

  • General Information
    • Manufacturer: Hyundai
    • Model Number: 45D-9
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
  • Dimensions
    • Overall Length: 139.8 inches
    • Width: 55.7 inches
    • Height to Top of Overhead Guard: 90.6 inches
  • Weight
    • Operating Weight: 16,755 lbs
  • Performance
    • Load Capacity: 9,920 lbs
    • Load Center: 24 inches
    • Travel Speed: 11.8 mph
    • Lifting Speed: 98 feet per minute
  • Powertrain
    • Engine: Cummins QSF3.8 Tier 4 Final
    • Engine Power: 74 horsepower
    • Transmission: Hydraulic Automatic
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: 8.25-15-14PR
    • Rear Tires: 6.50-10-10PR
  • Operator Environment
    • Seat: Adjustable ergonomic seat
    • Steering: Tilt steering column
    • Display: Multifunctional LCD display
  • Hydraulic System
    • Pump Capacity: 21.1 gallons per minute
    • Control Valve Type: Load Sensing
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Freight & Delivery Estimation

Need this equipment delivered to your job site or facility? Run our free freight calculator to compare carrier transit times and estimated rates tailored to this unit's exact weight and dimensions.

Calculate Rates
Preloads equipment specs & location automatically | Instant estimate • No registration required
Call
Get Quote
Equipment Finder Equipment
finder
*All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Please correct the following