Overview
Spec Sheet
Shipping/Freight
Equipment Description
NLEQ# 149667, 960 Hours, 48",Propane,3-Stage,Air Pneumatic Tires , Side Shift, 6000, 84/186"
Spec Sheet
  • General Information
    • Model Number: FG30N
    • Manufacturer: Cat
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Power and Drive Train
    • Engine Power: Approximately 59-75 HP (varies by specific configuration)
    • Transmission: Automatic
    • Drive Type: 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 10-12 ft (excluding forks)
    • Overall Width: Approximately 4-5 ft
    • Wheelbase: Approximately 6-7 ft
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed: Approximately 10-12 mph (unladen)
    • Turning Radius: Approximately 8-9 ft
  • Weight
    • Service Weight: Approximately 9,000-10,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Dual
    • Rear Tires: Single
  • Forks
    • Fork Length: Varies
    • Fork Adjustability: Adjustable width
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.

2021 Cat FG30N

lp gas

$29,950 USD
 
Instant Quote Eligible Listing - CLICK HERE!
CONTACT INFO
Name:
Sales

ADDRESS
National Lift Equipment
300 Pond St.
BristolPennsylvania 19007
ATTRIBUTES
STOCK #:
149667
YEAR:
2021
Manufacturer:
MODEL #:
FUEL:
MAST TYPE:
MAST HEIGHT:
84 / 186 in
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
960
LOCATION:
Pennsylvania [19007]
POST DATE:
12/17/2025
Reviews
Useful
Not

The Cat FG30N forklift is a solid workhorse that really impressed me during a recent warehouse project. We had a job that required us to maneuver around tight spaces and heavy loads, and this lift tackled both with ease. What stood out for me was its smooth operation; it felt reliable and strong when I was back in the driver's seat after years away from forklifts. The LP gas fuel was a nice touch too, giving it that extra power without the noise of diesel. Overall, I’d say it’s a dependable choice for anyone needing a sturdy forklift that doesn’t break the bank.


Review by Mike Thompson (6/17/2025)

  • General Information
    • Model Number: FG30N
    • Manufacturer: Cat
    • Type: Forklift
    • Subtype: Pneumatic Tire 4 Wheel Sit Down
    • Fuel Type: LP Gas
  • Power and Drive Train
    • Engine Power: Approximately 59-75 HP (varies by specific configuration)
    • Transmission: Automatic
    • Drive Type: 4 Wheel Sit Down
  • Dimensions
    • Overall Length: Approximately 10-12 ft (excluding forks)
    • Overall Width: Approximately 4-5 ft
    • Wheelbase: Approximately 6-7 ft
  • Performance
    • Load Capacity: 6,000 lbs
    • Travel Speed: Approximately 10-12 mph (unladen)
    • Turning Radius: Approximately 8-9 ft
  • Weight
    • Service Weight: Approximately 9,000-10,000 lbs
  • Tires
    • Tire Type: Pneumatic
    • Front Tires: Dual
    • Rear Tires: Single
  • Forks
    • Fork Length: Varies
    • Fork Adjustability: Adjustable width
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following