The Clark OSX15 is known for its compact size and efficient design, making it ideal for use in tight or confined spaces. It features an environmentally friendly electric power system, contributing to lower emissions and quieter operation. Additionally, the machine offers advanced safety features, high maneuverability, and ergonomic controls, enhancing operator comfort and productivity.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Big Joe Handling Systems Sales Dept 25932 Eden Landing Rd Hayward, CA 94545
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
#5001 Bettendorf Iowa Dennis Marriott 5875 State St Bettendorf, IA 52722
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
2024 Clark OSX15, 155"/366", 54" wide, wire guided
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
#5001 Bettendorf Iowa Dennis Marriott 5875 State St Bettendorf, IA 52722
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Discount Forklift Sales Dept 4905 Lima St Denver, CO 80239
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
2019 Clark OSX15 , 131/312 mast, 54" wide, Wire Guided
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Listings above this line match your search request, listings below may not match but are similar and may be used as an alternative.
2015 Clark C25CL
All Lift Service Co. Inc.
6
Used
DETAILS
SPECS
CONTACT
FINANCE
STK#:
2607
MAKE:
Clark
MODEL:
C25CL
MAST - LOWERED:
83 in
MAST - RAISED:
189 in
FUEL:
LP Gas
HOURS:
845 Hrs
SIDESHIFTER:
YES
CAPACITY:
5000 lbs
PRICE
$18,900 USD
General Information
Model: C25CL
Manufacturer: Clark
Type: Forklift
Engine Specifications
Engine Make: Mitsubishi
Engine Model: 4G64
Fuel Type: LPG
Power Output: Approximately 50 HP
Dimensions
Overall Length: 109 inches
Overall Width: 43.5 inches
Overall Height: 83 inches
Wheelbase: 65 inches
Ground Clearance: 4.3 inches
Capacity
Load Capacity: 5,000 lbs
Fuel Tank Capacity: Approx. 4.2 gallons
Tire Information
Front Tires: 7.00-12
Rear Tires: 6.00-9
Performance
Travel Speed (Loaded): 11.8 mph
Lifting Speed (Loaded): 118 feet per minute
Gradeability (Loaded): 25%
Braking System
Service Brake: Hydraulic
Parking Brake: Mechanical Lever
Steering
Type: Hydrostatic Power Steering
Forks
Fork Length: Varies
Width: 4.7 inches
Thickness: 1.6 inches
All Lift Service Co. Inc. Denise Germano 4607 Hamann Pkwy. Willoughby, OH 44094
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Mid Atlantic Industrial Equipment LTD. Sales Dept. 1231 E Wallace St York, PA 17403
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Notes: Quote is valid for 7 days. Quotes are subject to credit approval and applicable taxes are not included. Any lead times are factory estimates and are not guaranteed. Units canceled by customer after 24 hours of placing order will be charged a 25% fee. Mid Atlantic reserves the option to add any surcharges/increases beyond its control OR cancel the order in which case the customer will not be charged any fee. Finance/lease rates are subject to change after 90 days on ordered equipment pending arrival. Inbound freight is estimated at time of quote but subject to the rate at time of shipping on ordered units.
Payment Terms: Purchased equipment is due net upon delivery. Credit card payments will incur a 3.5% fee.
Financed/Leased Equipment: Documentation must be completed and signed upon or before delivery. Equipment cannot be placed in service until finance and warranty documents are executed.
Overall Height (overhead guard): Approximately 110 - 122 inches
Wheelbase: Approximately 90 - 100 inches
Capacity
Lifting Capacity: 20,000 lbs
Tires
Type: Pneumatic Tires
Front Tire Size: Typically 8.25 x 15 inches
Rear Tire Size: Typically 8.25 x 15 inches
Performance
Travel Speed (laden/unladen): Approximately 12 - 15 mph
Lift Speed (laden/unladen): Approximately 50 - 65 feet per minute
Gradeability (laden): Approximately 25%
Forks
Fork Length: Varies
Fork Width: Approximately 6 inches
Other Features
Operator Compartment: Sit Down
Steering: Power steering
Brakes: Hydraulic brakes
National Equipment, LLC Jim Gagliardi 12201 Hwy 99 (at Ave 12) Madera, CA 93638
FINANCING
All finance rates, terms, and conditions are subject to approval and may change without prior notice. Rates are provided for informational purposes only and are not guaranteed. Final rates and terms will depend on creditworthiness, market conditions, and other factors at the time of application.
Equipment
Close